AND4OA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaAlP Ultra Bright Orange Light Emission Surface Mount Package

Cathode
Index
1.25
R0.2
Weight: 2.0 mg
1.1
AND4OA
Ultra Bright LED Lamps: Type 2
Unit: mm
AND4OA
InGaAlP Ultra Bright Orange Light
0.6 _Emission
Surface Mount Package
Polarity
Features
• Small package size
• RoHS Compliant
• 2.0 (l) x 1.25 (w) x 1.1 (h) size
• Suitable for DIP and REFLOW soldering
• Recommended Forward Current: 10 mA
Maximum Ratings (T_a = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Symbol
I_F
V_R
P_D
T_Opr
Storage Temperature Range
T_Stg
Rating
25
4
62.5
-30 to 85
-30 to 85
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
l_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 4 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
27
–
–
–
–
Typical
2.0
–
60
612
15
605
140
Maximum
2.8
100
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
Product specifications contained herein may be
changed without prior notice. It is therefore
advisable to contact Purdy Electronics before
proceeding with the design of equipment
incorporating this product.
140 - 160°C ^{230°C max.}
10 sec. max.
The following soldering patterns are
recommended for reflow and dip soldering
Reflow
Dip
more than 2 min.
4°C/sec.
max.
Time
1.25 1.1 1.25
1.25 1.1 1.25
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
6/12/07