AND4GRA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaN Ultra Bright Green Light Emission Surface Mount Package

Weight: 2.0 mg
Unit: mm
AND4GRA
Ultra Bright LED Lamps: Type 2
AND4GRA
InGaN Ultra Bright Green Light
Emission
Surface Mount Package
Features
• Small package size
• 2.0 (l) x 1.25 (w) x 1.1 (h) size
• Suitable for DIP and REFLOW soldering
• Recommended Forward Current: 10 mA
• RoHS Compliant
Product specifications contained herein may be changed without prior
notice. It is therefore advisable to contact Purdy Electronics before
proceeding with the design of equipment incorporating this product.
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol Rating
Forward Current
I_F
30
Reverse Voltage
V_R
5
Power Dissipation
P_D
120
Operating Temp. Range T_Opr -30 to 80
Storage Temp. Range
T_Stg
-40to 100
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Forward Voltage
Reverse Current
Luminous Intensity
Peak Emission Wavelength
Spectral Line Half Width
Dominant Wavelength
Full Viewing Angle
Symbol
V_F
I_R
I_V
l_P
∆l
ld
2 q 1/2
Test Condition
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
Minimum
3.1
–
84
–
–
–
–
Typical
3.5
–
140
540
45
530
120
Maximum
3.8
100
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
140 - 160°C ^{230°C max.}
10 sec. max.
3. Absolute secure counter measures against
static electricity and surge should be taken
when handling these products. It is
recommended to use wrist band or antistatic
gloves when handling these LEDs.
The following soldering patterns are
recommended for reflow soldering:
more than 2 min.
4°C/sec.
max.
Time
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail]
www.purdyelectronics.com
7/18/07