AND4GA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – GaP Ultra Bright Green Light Emission Surface Mount Package

Cathode
Index
1.25
R0.2
Weight: 2.0 mg
1.1
Unit: mm
0.6
AND4GA
Ultra Bright LED Lamps: Type 2
AND4GA
GaP Ultra Bright Green Light Emission
Surface Mount Package
Polarity
Features
• Small package size
• 2.0 (l) x 1.25 (w) x 1.1 (h) size
• Suitable for DIP and REFLOW soldering
• Recommended Forward Current: 10 mA
• RoHS Compliant
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol Rating
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
I_F
V_R
P_D
T_Opr
T_Stg
30
5
100
-40 to 85
-40to 90
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition Minimum
Typical Maximum
Unit
Forward Voltage
V_F
I_F = 20 mA
–
2.1
2.4
V
Reverse Current
I_R
V_R = 5 V
–
–
10
µA
Luminous Intensity
I_V
I_F = 20 mA
8.0
15
–
mcd
Peak Emission Wavelength
l_P
I_F = 20 mA
–
570
–
nm
Spectral Line Half Width
∆λ
I_F = 20 mA
–
30
–
nm
Dominant Wavelength
λd
I_F = 20 mA
–
571
–
nm
Full Viewing Angle
θ
I_V = 1/2 Peak
–
140
–
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
140 - 160°C ^{230°C max.}
10 sec. max.
Product specifications contained herein may
be changed without prior notice.
It is therefore advisable to contact Purdy
Electronics before proceeding with the design
of equipment incorporating this product.
The following soldering patterns are
recommended for reflow soldering
Reflow
more than 2 min.
4°C/sec.
max.
Time
1.2 0.9 1.2
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail]
www.purdyelectronics.com
7/18/07