|
AND4BRB Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaN Ultra Bright Blue Chip LEDs with Right Angle Lens | |||
|
Weight: 2.0 mg
Unit: mm
AND4BRB
Ultra Bright LED Lamps
AND4BRB
InGaN Ultra Bright Blue Chip LEDs
with Right Angle Lens
Features
⢠RoHS Compliant
⢠Package in 8mm tape on 7: dia. reel
⢠Compatible with automatic placement equipment
⢠Suitable for infrared and vapor phase reflow solder
process
⢠Mono-color type
⢠Suitable for automotive backlighting, Flat backlighting
for LDC, switch and symbol, indicator and backlighting for
telecommunication use
Maximum Ratings (Ta = 25°C)
Characteristics
Symbol Rating Unit
Product speciï¬cations contained herein may be changed
without prior notice. It is therefore advisable to contact Purdy
Electronics before proceeding with the design of equipment
incorporating this product.
Electro-Optical Characteristics (Ta = 25°C)
Forward Current
Reverse Voltage
Power Dissipation
Operating Temp. Range
Storage Temp. Range
IF
25
mA
VR
5
V
PD
120
mW
TOpr
-40 to 85
°C
TStg
-40 to 90
°C
Characteristics
Symbol
Test Condition Minimum Typical Maximum
Unit
Forward Voltage
VF
IF = 20 mA
â
3.5
4.0
V
Reverse Current
IR
VR = 5 V
â
â
10
µA
Luminous Intensity
IV
IF = 20 mA
23
29
â
mcd
Peak Emission Wavelength
lP
IF = 20 mA
â
468
â
nm
Spectral Line Half Width
âl
IF = 20 mA
â
26
â
nm
Dominant Wavelength
ld
IF = 20 mA
â
470
â
nm
Full Viewing Angle
2 q 1/2
IF = 20 mA
â
120
â
degree
Precaution
3. Absolute secure counter measures against
Please be careful of the following:
static electricity and surge should be taken
1. Manual soldering: maximum temperature of iron tip: 260°C max.
when handling these products. It is
Soldering time: within 5 sec. per solder-land
recommended to use wrist band or antistatic
Soldering portion of lead: up to 1.6 mm from the body of the device gloves when handling these LEDs.
2. Reflow solder: recommended condition is as follows:
140 - 160°C 230°C max.
10 sec. max.
more than 2 min.
4°C/sec.
max.
Time
Purdy Electronics Corporation ⢠720 Palomar Avenue ⢠Sunnyvale, CA 94085
Tel: 408.523.8200 ⢠Fax: 408.733.1287 ⢠sales@purdyelectronics.com
www.purdyelectronics.com
7/18/07
|
▷ |