AND262HAP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Ultra Bright LED Lamps

Weight: 0.14 g
Unit: mm
AND262HAP
Ultra Bright LED Lamps: Type 3
AND262HAP
InGaAlP Amber Light Emission
T-1 Package (3 mm)
Features
• High efficient amber LED
• Peak wavelength (λp = 612 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1-20 mA recommended
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• RoHS Compliant
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
I_F
25
mA
V_R
5
V
P_D
60
mW
T_Opr
-25 to 85
°C
T_Stg
-30 to 100
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
λ_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
240
–
–
–
–
Typical
2.0
–
390
612
17
605
40
Maximum
2.4
50
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
6/12/07