AND226R Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Standard Bright LED Lamps

Weight: 0.15 g Unit: mm
4.0
3.5
ø 2.0
ø 1.6
AND226R
Special Shape
2mm Flat Top
Features
• Low power requirement
• Special shape
• All plastic molded lens
• GaP – Red
• RoHS Compliant
AND226R
Standard Bright LED Lamps
0.5
2.54
Optical Characteristics (T = 25°C)
Part
Number
Color
LED Lens
Lens
Desc.
Axial Luminous
Intensity
(mcd)
Min. Typ.
Test
Condition
(I_F–mA)
Viewing
Angle
2θ1/2
(deg)
AND226R
Red Red Diffused 0.5
1.0
10
70
Tolerance: ±0.2
Absolute Maximum Ratings (T_A = 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature
Storage Temperature Range
I_F
25
mA
V_R
5
V
P_D
120
mW
T_Opr
-40 to +85
°C
T_Stg
-40 to +85
°C
Electro-Optical Characteristics (T_A = 25°C)
Characteristics
AND226R
Symbol
Test Condition
Unit
Typ.
Max.
Forward Voltage
Reverse Current
Peak Emission Wavelength
Spectral Line Half Width
V_F
I_F = 20mA
2.0
2.5
V
I_R
V_R = 5 V
–
10
µA
λp
I_F = 20mA
700
–
nm
λ
I_F = 20mA
45
–
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
7/18/07