|
AND211GA Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Standard Bright LED Lamps | |||
|
Weight: 0.30 g Unit: mm
3.9(.154)
AND211GA
Standard Bright LED Lamps
AND211GA
Special Shape
1.9mm x 3.9mm Rectangular
Features
⢠Low power requirement
⢠Special shape
⢠All plastic molded lens
⢠GaP â Green
⢠RoHS Compliant
Optical Characteristics (T = 25°C)
Part
Number
Color
LED Lens
Lens
Desc.
Axial Luminous
Intensity
(mcd)
Min. Typ.
Test
Condition
(IFâmA)
Viewing
Angle
2θ1/2
(deg)
AND211GA Green Green Diffused 2.0
4.0
10
110
2.54(0.1)
Absolute Maximum Ratings (TA = 25°C)
Characteristics
Symbol
Rating
Unit
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature
Storage Temperature Range
IF
25
mA
VR
5
V
PD
105
mW
TOpr
-40 to +85
°C
TStg
-40 to +85
°C
Electro-Optical Characteristics (TA = 25°C)
Characteristics
AND211GA
Symbol
Test Condition
(Green)
Unit
Typ.
Max.
Forward Voltage
Reverse Current
Peak Emission Wavelength
Spectral Line Half Width
VF
IF = 20mA
2.2
2.5
V
IR
VR = 5V
â
10
µA
λp
IF = 20mA
565
â
nm
λ
IF = 20mA
30
â
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Product speciï¬cations contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation ⢠720 Palomar Avenue ⢠Sunnyvale, CA 94085
Tel: 408.523.8200 ⢠Fax: 408.733.1287 ⢠email@purdyelectronics.com ⢠www.purdyelectronics.com
7/18/07
|
▷ |