AND208SGA Datasheet, PDF (1/3 Pages) Purdy Electronics Corporation – Standard Bright LED Lamps

Weight: 0.38 g Unit: mm
208S
AND208SGA
Standard Bright LED Lamps
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with
the design of equipment incorporating this product.
4.0 ± 0.2
5.0 ± 0.2
4.0 ± 0.2
2.0 ± 0.2
AND208SGA
Dual Color
2mm x 5mm Rectangular
2.54 2.54 2.0 Typ
Green
Red
Features
• All plastic mold type
• Low drive current, (forward current = 10 – 15 mA)
• Fast response time, capable of pulse operation
• Viewing Angle: 110°
• RoHS Compliant
Optical Characteristics (T = 25°C)
Part
Number
Source
Color
Emitting Lens
GaAsP/GaP Red
AND208SGA
GaP
Green
White
White
Lens
Desc.
Diffused
Diffused
Luminous Intensity
@ 20 mA
(mcd)
Min.
Typ.
8
14
8
14
Absolute Maximum Ratings (T_A = 25°C)
Characteristics
Symbol
Forward Current
I_F
Reverse Voltage
V_R
Power Dissipation
P_D
Operating Temperature
T_Opr
Storage Temperature Range
T_Stg
Rating
GaAsP/GaP
(Red)
30
5
105
-40 to +85
-40 to +85
GaP
(Green)
25
5
105
Unit
mA
V
Total Package
°C
°C
Electro-Optical Characteristics (T_A = 25°C)
Rating
Characteristics
Symbol Test Condition
GaAsP/GaP
(Red)
GaP
(Green)
Unit
Typ.
Max.
Typ.
Max.
Forward Voltage
Reverse Current
Peak Emission Wavelength
Spectral Line Half Width
V_F
I_F = 20mA
2.0
2.5
2.2
2.5
V
I_R
V_R = 5 V
–
10
–
10
µA
λp
I_F = 20mA
625
–
565
–
nm
λ
I_F = 20mA
45
–
30
–
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
7/18/07