|
AND190HYP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Ultra Bright LED Lamps | |||
|
Weight 1.0g
Unit: mm
AND190HYP
Ultra Bright LED Lamps: Type 3
AND190HYP
InGaAlP High Brightness Yellow Light Emission
T-3 Package (10 mm)
10.0±0.2
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
Features
⢠New emission material (InGaAlP) yellow LED
⢠Peak wavelength (lp = 590 nm) high bright emission
⢠All plastic mold type, clear colorless lens
⢠Low drive current, (forward current = 2 to 20 mA)
⢠Excellent On-Off contrast ratio
⢠Fast response time, capable of pulse operation
⢠High power luminous intensity
⢠Suitable for Outdoor Message Signboards
⢠RoHS Compliant
Maximum Ratings (Ta = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Symbol
IF
VR
PD
TOpr
TStg
Rating
50
5
125
-40 to 85
-40 to 100
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol Test Condition
Forward Voltage
VF
Reverse Current
IR
Luminous Intensity
IV
Peak Emission Wavelength
lP
Spectral Line Half Width
âl
Dominant Wavelength
ld
Full Viewing Angle
q
IF = 20 mA
VR = 4 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
IV = 1/2 Peak
Minimum
â
â
4,500
â
â
â
â
Typical
2.1
â
6,300
590
15
587
6
Maximum
2.8
50
â
â
â
â
â
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product speciï¬cations contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation ⢠720 Palomar Avenue ⢠Sunnyvale, CA 94085
Tel: 408.523.8200 ⢠Fax: 408.733.1287 ⢠sales@purdyelectronics.com ⢠www.purdyelectronics.com
7/18/07
|
▷ |