|
AND185HOP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaAlP High Brightness Orange Light | |||
|
Weight: 0.31 g
5.0±0.2
Unit: mm
AND185HOP
Ultra Bright LED Lamps: Type 3
AND185HOP
InGaAlP High Brightness Orange Light
Emission
T-1 3/4 Package (5 mm)
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
Features
⢠Peak wavelength (λp = 620 nm) high bright emission
⢠All plastic mold type, clear colorless lens
⢠Low drive current: 1 to 20 mA DC
⢠Excellent On-Off contrast ratio
⢠Fast response time, capable of pulse operation
⢠High power luminous intensity
⢠Suitable for Outdoor Message Signboards, Automotive Use
⢠RoHS Compliant
Maximum Ratings (Ta = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Symbol
IF
VR
PD
TOpr
TStg
Rating
50
5
125
-40 to 85
-40 to 100
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol Test Condition
Forward Voltage
VF
Reverse Current
IR
Luminous Intensity
IV
Peak Emission Wavelength
λP
Spectral Line Half Width
âλ
Dominant Wavelength
λd
Full Viewing Angle
θ
IF = 20 mA
VR = 5 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
IV = 1/2 Peak
Minimum
â
â
9,000
â
â
â
â
Typical
2.0
â
11,750
620
18
615
6
Maximum
2.4
10
â
â
â
â
â
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product speciï¬cations contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation ⢠720 Palomar Avenue ⢠Sunnyvale, CA 94085
Tel: 408.523.8200 ⢠Fax: 408.733.1287 ⢠sales@purdyelectronics.com ⢠www.purdyelectronics.com
6/12/07
|
▷ |