AND181YP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Standard Bright LED LAMPS

Weight: 0:30 g
Unit: mm
AND181YP
Standard Bright LED LAMPS
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with
the design of equipment incorporating this product.
5.0
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
AND181YP
Standard LED
T-1 3/4 Package (5 mm)
Features
• Low power requirement
• Flush-mount
• All plastic molded lens
• Color: GaAsP–Yellow
• RoHS Compliant
Optical Characteristics (T_a = 25°C)
Color
LED
Yellow
Lens
Lt Yellow
Lens
Desc.
Clear
Axial Luminous
Intensity (mcd)
Min. Typ.
Test
Condition
(I_F–mA)
75
150
20
Viewing
Angle
2θ1/2
(deg)
15
Absolute Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Rating
(Yellow)
Unit
Forward Current (DC)
I_F
30
mA
Reverse Voltage
V_R
4
V
Power Dissipation
P_D
75
mW
Operating Temperature
T_Opr
-25 to +85
°C
Storage Temperature Range
T_Stg
-25 to +100
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Yellow
Symbol
Test Condition
Unit
Min.
Typ.
Max.
Forward Voltage
V_F
I_F = 20mA
–
2.1
3.0
V
Reverse Current
I_R
V_R = 4 V
–
–
100
µA
Peak Emission Wavelength
λp
I_F = 15mA
–
585
–
nm
Spectral Line Half Width
λ
I_F = 15mA
–
32
–
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the
body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be
performed after the lead forming.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/18/07
Tel: [phone] • Fax: [phone] • [e-mail]
1
www.purdyelectronics.com