|
AND180HRP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Ultra Bright LED Lamps | |||
|
OPTOELECTRONICS
AND180HRP
Ultra Bright LED Lamps: Type 1
Weight: 0.31g Unit: mm
AND180HRP
AlGaInP High Brightness Red Light Emission
T-1 3/4 Package (5mm)
Features
⢠Peak wavelength (λp = 644 nm) high bright emission
⢠All plastic mold type, clear colorless lens
⢠Low drive current: 1 to 20 mA DC
⢠Excellent On-Off contrast ratio
⢠Fast response time, capable of pulse operation
⢠High power luminous intensity
⢠Suitable for outdoor Message Signboards
⢠RoHS compliant
Maximum Ratings (Ta - 25 ºC)
Characteristic
Symbol Rating Unit
Forward Current
IF
50
mA
Reverse Voltage
Power Dissipation
VR
4
V
PD
125
mW
Operating Temperature Range
Storage Temperature Range
T OPR
-40 to 85 ºC
T STG
-40 to 100 ºC
Electro-Optical Characteristics (Ta = 25ºC)
Item
Symbol
Forward Voltage
VF
Reverse Current
IR
Luminous Intensity
IV
Peak Emission Wavelength
λP
Spectral Line Half Width
Îλ
Dominant Wavelength
λd
Full Viewing Angle
θ
Test Condition
IF = 20 mA
VR = 4 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
IV = 1/2 Peak
Minimum
â
â
3,200
â
â
â
â
Typical
1.9
â
6,000
644
18
630
8
Maxiumum
2.5
50
â
â
â
â
â
Unit
V
μA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1.
Dip soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2.
The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product speciï¬cations contained herein may be changed without prior notice.
I
Purdy Electronics Corporation ⢠755 North Pastoria Avenue ⢠Sunnyvale, CA 94085-2918
1
Tel: 408-523-8200 ⢠Fax: 408-733-1287 ⢠sales@purdyelectronics.com ⢠www.purdyelectronics.com
9/4/12
|
▷ |