AND180CRP Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – GaAlAs Red Light Emission T-1 3/4 Package (5 mm)

Weight: 0.31 g
Unit: mm
5.0±0.2
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
AND180CRP
Ultra Bright LED Lamps: Type 1
AND180CRP
GaAlAs Red Light Emission
T-1 3/4 Package (5 mm)
Features
• Peak wavelength (λp = 660 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 20 mA for outdoor applications
0.5 mA for indoor applications
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• Suitable for Outdoor Message Signboards
• RoHS Compliant
Maximum Ratings (T_a = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Symbol
I_F
V_R
P_D
T_Opr
T_Stg
Rating
40
5
125
-40 to 85
-40 to 100
Unit
mA
V
mW
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
l_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 4 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
2,500
–
–
–
–
Typical
1.7
–
3,600
660
20
643
10
Maximum
2.4
10
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
6/14/07