AND157HSP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Ultra Bright LED Lamps

Weight: 0.31 g
5.0±0.2
Unit: mm
AND157HSP
Ultra Bright LED Lamps
AND157HSP
InGaAlP High Brightness Soft Red Light
Emission
5mm (T1-3/4) Package
Features
• Peak wavelength (λp=632 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 ~ 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power intensity – suitable for outdoor usage
• High reliability, storage temp. –40 ~ 85°C
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol Rating
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Peak Forward Current Duty 1/
10, Pulse Width 10 ms
I_F
V_R
P_D
T_Opr
T_Stg
IFP
50
5
125
-40 to 85
-40 to 100
160
Unit
mA
V
mW
°C
°C
mA
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition Minimum
Forward Voltage
Reverse Current
Luminous Intensity
Peak Emission Wavelength
Spectral Line Half Width
Dominant Wavelength
Full Viewing Angle
V_F
I_R
I_V
l_P
λ∆
λd
2 θ 1/2
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
–
–
4,500
–
–
–
–
Precaution
Please be careful of the following:
1. Soldering temperature: 260 C max., Soldering time: 5 sec. max.
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
Typical
2.0
–
5,650
632
20
615
30
Maximum
2.6
50
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
1/30/07