English
Language : 

AND157HAP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Ultra Bright LED Lamps
Weight: 0.31 g
5.0
Unit: mm
AND157HAP
Ultra Bright LED Lamps: Type 3
AND157HAP
InGaAlP High Brightness
Amber Light Emission
T-1 3/4 Package (5 mm)
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
Features
• Peak wavelength (λp = 612 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current: 1 to 20 mA DC
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for outdoor usage
• High reliability; storage temperature -25 to +120°C
• RoHS Compliant
Maximum Ratings (Ta = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Symbol
IF
VR
PD
TOpr
TStg
Rating
30
4
100
-25 to 85
-25 to 100
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
VF
Reverse Current
IR
Luminous Intensity
IV
Peak Emission Wavelength
lP
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
IF = 20 mA
VR = 4 V
IF = 20 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
IV = 1/2 Peak
Minimum
–
–
1,200
–
–
–
–
Typical
2.1
–
2,000
612
15
605
20
Maximum
3.0
50
–
–
–
–
–
Unit
mA
V
mW
°C
°C
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • sales@purdyelectronics.com • www.purdyelectronics.com
6/12/07