AND156HOP Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – InGaAlP Orange Light Emission

Weight: 0.31 g
Unit: mm
AND156HOP
Ultra Bright LED Lamps: Type 3
AND156HOP
InGaAlP Orange Light Emission
T-1 3/4 Package (5 mm)
5.0±0.2
Features
• New emission material (InGaAlP) orange LED
• Peak wavelength (λp = 620 nm) high bright emission
• All plastic mold type, clear colorless lens
• Low drive current, (forward current = 1 to 20 mA)
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse operation
• High power luminous intensity
• Suitable for Outdoor Message Signboards
• RoHS Compliant
0.5
Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Rating
Unit
2.54
Cathode Index
12
1. Anode
2. Cathode
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
I_F
50
mA
V_R
5
V
P_D
125
mW
T_Opr
-40 to 85
°C
T_Sig
-40 to 100
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Forward Voltage
V_F
Reverse Current
I_R
Luminous Intensity
I_V
Peak Emission Wavelength
λ_P
Spectral Line Half Width
∆λ
Dominant Wavelength
λd
Full Viewing Angle
θ
I_F = 20 mA
V_R = 5 V
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_F = 20 mA
I_V = 1/2 Peak
Minimum
–
–
630
–
–
–
–
Typical
2.0
–
800
620
18
615
25
Maximum
2.4
10
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 5 sec. max
Soldering portion of lead: up to 1.6 mm from the body of the device
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
6/12/07