AND124R Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Standard LED

Weight: 0:30 g
ø3.8 ± 0.2
ø3.1 ± 0.2
Unit: mm
AND124R
Standard LED
T-1 Package (3 mm)
Features
• Low power requirement
• Stand-off or flush-mount
• All plastic molded lens
• Color: GaP–Red
AND124R
Standard Bright LED LAMPS
• RoHS Compliant
0.5
0.5
Optical Characteristics (T_a = 25°C)
Part
Number
AND124R
Color
LED
Red
Lens
Red
Lens
Desc.
Axial Luminous
Intensity (mcd)
Min. Typ.
Test
Condition
(I_F–mA)
Viewing
Angle
2θ1/2
(deg)
Diffused 1.3
3.0
10
60
2.54
Absolute Maximum Ratings (T_a = 25°C)
Characteristics
Symbol
Rating
Unit
1. Anode
Forward Current (DC)
I_F
25
mA
1
2
2. Cathode
Reverse Voltage
V_R
5
V
Power Dissipation
P_D
120
mW
Operating Temperature
T_Opr
-40 to +85
°C
Storage Temperature Range
T_Stg
-40 to +85
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Red
Symbol
Test Condition
Unit
Min.
Typ.
Max.
Forward Voltage
V_F
I_F = 20mA
–
2.0
2.5
V
Reverse Current
I_R
V_R = 5 V
–
–
10
µA
Peak Emission Wavelength
λp
I_F = 15mA
–
700
–
nm
Spectral Line Half Width
λ
I_F = 15mA
–
45
–
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead
forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
6/12/07
Tel: [phone] • Fax: [phone] • [e-mail]
1
www.purdyelectronics.com