AND116SG Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Dual Color

Weight: 0.35 g
AND116SG
Standard Bright LED Lamps
Unit: mm
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the
design of equipment incorporating this product.
5.0
AND116SG
Dual Color
T-1 3/4 (5mm)
Features
• Dual color: Red (GaAsP) / Green (GaP)
0.5
• Common cathode
• All plastic mold type, milky diffused lens
• Low drive current: 15 to 20 mA
• Fast response time, capable of pulse operation
• RoHS Compliant
2.54 2.54
Cathode Index
1 23
1. Anode (Green)
2. Common
Cathode
3. Anode (Red)
Absolute Maximum Ratings (T_a = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature
Storage Temperature Range
Optical Characteristics (T_a = 25°C)
Color
Lens Desc.
Axial Luminous
Intensity
(mcd)
LED Lens
Min.
Typ.
Red Milky Diffused
10
12
Green Milky Diffused
10
12
Symbol
I_F
V_R
P_D
T_Opr
T_Stg
Rating
Red
Green
25
25
5
5
75
75
-25 to +85
-25 to +100
Test
Condition
(I_F–mA)
20
20
Viewing
Angle
2θ1/2
(deg)
70
70
Unit
mA
V
Total Package
°C
°C
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Red
Green
Symbol Test Condition
Unit
Typ.
Max.
Typ.
Max.
Forward Voltage
Reverse Current
Peak Emission Wavelength
Spectral Line Half Width
V_F
I_F = 20mA
2.1
3.0
2.1
3.0
V
I_R
V_R = 4 V
–
100
–
100
µA
λp
I_F = 20mA
635
–
565
–
nm
λ
I_F = 20mA
40
–
25
–
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the
lead forming.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
7/18/07