AND116CR Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – GaAIAs Red Light Emission

Weight: 0.35 g
ø5.0 0.2
0.5
AND116CR
Ultra Bright LED Lamps: Type 1
Unit: mm
AND116CR
GaAIAs Red Light Emission
T-1 3/4 Package (5 mm)
Features
• Double hetero structure die
• Peak wavelength (λp = 660 nm) high bright emission
• All plastic mold type, milky diffused lens
• Low drive current
• Solid state reliability, long life
• Excellent On-Off contrast ratio
• Fast response time, capable of pulse drive
• High brightness for outdoor applications
• RoHS Compliant
2.54
Cathode Index
12
1. Anode
2. Cathode
Maximum Ratings (T = 25°C)
Characteristics
Forward Current
Reverse Voltage
Power Dissipation
Operating Temperature Range
Storage Temperature Range
Symbol
I_F
V_R
P_D
T_Opr
T_Stg
Rating
50
4
125
-20 to 85
-30 to 100
Unit
mA
V
mW
ºC
ºC
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol Test Condition
Forward Voltage
Reverse Current
Luminous Intensity
Peak Emission Wavelength
Spectral Line Half Width
Dominant Wavelength
Full Viewing Angle
V_F
I_F = 20mA
I_R
V_R = 4 V
I_V
I_F = 20mA
I_P
I_F = 20mA
∆λ
I_F = 20mA
λd
I_F = 20mA
θ
I_V = 1/2 Peak
Minimum
–
–
56
–
–
–
–
Typical
1.75
–
130
660
25
640
60
Maximum
3.0
100
–
–
–
–
–
Unit
V
µA
mcd
nm
nm
nm
degree
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max
Soldering time: 3 sec. max
Soldering portion of lead: up to 2 mm from the body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress.
Soldering should be performed after the lead forming.
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: [phone] • Fax: [phone] • [e-mail] • www.purdyelectronics.com
6/14/07