AND114Y Datasheet, PDF (1/2 Pages) Purdy Electronics Corporation – Standard Bright LED LAMPS

Weight: 0:30 g
Unit: mm
AND114Y
AND114Y/YP
Standard Bright LED LAMPS
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with
the design of equipment incorporating this product.
ø5.0 ± 0.2
Cathode
0.5
Index
2.54
Cathode Index
12
1. Anode
2. Cathode
AND114YP
ø5.0 ± 0.2
AND114Y/YP
Standard LED
T-1 3/4 Package (5 mm)
Features
• Low power requirement
• Flush-mount
• All plastic molded lens
• Color: GaAsP–Yellow
• RoHS Compliant
Optical Characteristics (T_a = 25°C)
Color
LED
Lens
Lens
Desc.
Axial Luminous
Intensity (mcd)
Min. Typ.
Test
Condition
(I_F–mA)
Yellow
Yellow
Diffused
5
18
10
Viewing
Angle
2θ1/2
(deg)
60
Absolute Maximum Ratings (T_a = 25°C)
0.5
2.54
Cathode Index
12
1. Anode
2. Cathode
Characteristics
Forward Current (DC)
Reverse Voltage
Power Dissipation
Operating Temperature
Storage Temperature Range
Electro-Optical Characteristics (T_a = 25°C)
Characteristics
Symbol
Test Condition
Min.
Forward Voltage
V_F
I_F = 20mA
–
Reverse Current
I_R
V_R = 5 V
–
Peak Emission Wavelength
λp
I_F = 15mA
–
Spectral Line Half Width
λ
I_F = 15mA
–
Symbol
I_F
V_R
P_D
T_Opr
T_Stg
Yellow
Typ.
2.1
–
590
35
Rating
(Yellow)
30
5
105
-40 to +85
-40 to +85
Max.
2.5
10
–
–
Unit
mA
V
mW
°C
°C
Unit
V
µA
nm
nm
Precaution
Please be careful of the following:
1. Soldering temperature: 260°C max; Soldering time: 5 sec. max; Soldering portion of lead: up to 1.6 mm from the
body of the device.
2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be
performed after the lead forming.
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7/18/07
Tel: [phone] • Fax: [phone] • [e-mail]
1
www.purdyelectronics.com