ASM690A Datasheet, PDF (8/15 Pages) PulseCore Semiconductor – μP Power Supply Supervisor With Battery Backup Switch

April 2008
rev 1.7
Absolute Maximum Ratings
Parameter
Pin Terminal Voltage with Respect to Ground
V_CC
VBATT
All other inputs¹
Input Current at VCC
Input Current at VBATT
Input Current at GND
ASM690A/692A
ASM802L/802M
ASM805L
Min
Max
-0.3
6.0
-0.3
6.0
-0.3
V_CC + 0.3
200
50
20
Unit
V
V
V
mA
mA
mA
Output Current
VOUT
Short circuit protected
All other inputs
Rate of Rise: VBATT and VCC
Continuous Power Dissipation
Plastic DIP (derate 9mW/°C above 70°C)
SO (derate 5.9mW/°C above 70°C)
Operating Temperature Range (C Devices)
Operating Temperature Range (E Devices)
20
100
800
500
0
70
-40
85
mA
V/µs
mW
mW
°C
°C
Storage Temperature Range
-65
160
°C
Lead Temperature (Soldering, 10 sec)
300
°C
ESD rating
HBM
MM
1
KV
100
V
1. The input voltage limits on PFI and WDI may be exceeded if the current is limited to less than 10mA
Note: These are stress ratings only and functional operation is not implied. Exposure to absolute maximum ratings for prolonged time periods
may affect device reliability.
µP Power Supply Supervisor With Battery Backup Switch
Notice: The information in this document is subject to change without notice.
8 of 15