PCS5P23Z05B Datasheet, PDF (5/14 Pages) PulseCore Semiconductor – Timing-Safe™ Peak EMI reduction IC

May 2007
rev 0.2
Switching Characteristics for PCS5P23Z05B and PCS5P23Z09B
PCS5P23Z05B/09B
Parameter
Description
Test Conditions
Min
1/t₁
Output Frequency
30pF load
20
Duty Cycle ² = (t₂ / t₁) * 100 Measured at V_DD/2
40
t₃
Output Rise Time^{1, 2}
Measured between 0.8V and 2.0V
t₄
Output Fall Time^{1, 2}
Measured between 2.0V and 0.8V
t₅
Output-to-output skew ²
All outputs equally loaded
Delay, CLKIN Rising Edge to
t₆
CLKOUT Rising Edge ²
Measured at V_DD /2
t₇
Device-to-Device Skew ²
Measured at V_DD/2 on the CLKOUT pins
of the device
t_J
Cycle-to-cycle jitter ²
Loaded outputs
t_LOCK
PLL Lock Time ²
Stable power supply, valid clock presented
on CLKIN pin
Note: 1. The parameters are specified with loaded outputs.
2. Parameter is guaranteed by design and characterization. Not 100% tested in production
Typ
50
Max
50
60
2.5
2.5
250
Unit
MHz
%
nS
nS
pS
±350 pS
700 pS
200 pS
1.0 mS
Timing-Safe™ Peak EMI Reduction IC
Notice: The information in this document is subject to change without notice.
5 of 14