PCS809 Datasheet, PDF (1/8 Pages) PulseCore Semiconductor – 3-Pin μP Voltage Supervisor

January 2007
rev 0.2
3-Pin µP Voltage Supervisor
PCS809/PCS810
FEATURES
• Ultra Low Supply Current 1µA(typ.)
• Guaranteed Reset Valid to VCC=0.9V
• Available in three Output Types: Open Drain
Active Low (PCS809N), Push-Pull Active Low
(PCS809), Push-Pull Active High (PCS810)
• 140ms Min. Power-On Reset Pulse Width
• Internally Fixed Threshold 2.3V, 2.6V, 2.9V,
3.1V, 4.0V, 4.4V, and 4.6V
• Tight Voltage Threshold Tolerance: 1.5%
• Low profile Package: SOT-23-3
APPLICATIONS
• Notebook Computers
• Digital Still Cameras
• PDAs
• Critical Microprocessor Monitoring
RESET THRESHOLD
Suffix
Voltage(V)
L
4.6
M
4.4
J
4.0
T
3.1
S
2.9
R
2.6
P
2.3
DESCRIPTION
PCS809/PCS810 are low-power microprocessor (µP)
supervisory circuits used to monitor power supplies in µP
and digital systems. They provide applications with
benefits of circuit reliability and low cost by eliminating
external components.
These devices perform as valid singles in applications with
VCC ranging from 6.0V down to 0.9V. The reset signal
lasts for a minimum period of 140ms whenever VCC
supply voltage falls below preset threshold. Both PCS809
and PCS810 were designed with a reset comparator to
help identify invalid signals, which last less than 140ms.
The only difference between them is that they have an
active-low RESET output and active-high RESET output,
respectively.
Low supply current (1µA) makes PCS809/PCS810 ideal
for portable equipment. The devices are available in 3-
SOT-23 package
Typical Operating Circuit
VCC
VCC
PCS809
(PCS810)
RESET
(RESET)
VCC
µP
RESET
INPUT
GND
GND
Push-Pull Output
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200 Campbell, CA 95008 • Tel: [phone] • Fax: [phone]
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.