PCS2P20807A Datasheet, PDF (1/11 Pages) PulseCore Semiconductor – 2.5V CMOS 1-TO-10 CLOCK DRIVER

September 2006
rev 0.3
PCS2P20807A
2.5V CMOS 1-TO-10 CLOCK DRIVER
Features
• High frequency > 150MHz
• Guaranteed low skew < 150pS (max.) between
any two outputs
• Very low duty cycle distortion < 300pS
• High speed: propagation delay < 3nS
• Very low CMOS power levels
• TTL compatible inputs and outputs
• 1:10 fanout
• Maximum output rise and fall time < 1.25nS
(max.)
• Low input capacitance: 3pF (typ)
• 2.5V Supply Voltage
• Available in SSOP and QSOP Packages
Product Description
The PCS2P20807A is a 2.5V compatible, high speed, low
noise, 1:10 fanout, non-inverting clock buffer. The large
fanout from a single input reduces loading on the preceding
driver and provides an efficient clock distribution network.
Providing output to output skew as low as 150pS, the
PCS20807A is an ideal clock distribution device for
synchronous systems. Multiple power and grounds reduce
noise. Typical applications are clock and signal distribution.
Block Diagram
O₁
O₂
O₃
O₄
O₅
IN
O₆
O₇
O₈
O₉
O₁₀
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: [phone] • Fax: [phone]
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.