|
ASM2I9940L Datasheet, PDF (1/13 Pages) Alliance Semiconductor Corporation – Low Voltage 1:18 Clock Distribution Chip | |||
|
April 2007
rev 1.2
ASM2I9940L
Low Voltage 1:18 Clock Distribution Chip
Features
⢠LVPECL or LVCMOS Clock Input
⢠2.5V LVCMOS Outputs for Pentium II
Microprocessor Support*
⢠150pS Maximum Output-to-Output Skew
⢠Maximum Output Frequency of 250MHz
⢠32 Lead LQFP & TQFP Packaging
⢠Dual or Single Supply Device
⢠Dual VCC Supply Voltage, 3.3V Core and 2.5V
Output
⢠Single 3.3V VCC Supply Voltage for 3.3V Outputs
⢠Single 2.5V VCC Supply Voltage for 2.5V I/O
⢠Pin and Function compatible to MPC940L,
MPC9109, CY29940 and CY29940-1
Functional Description
The ASM2I9940L is a 1:18 low Voltage Clock distribution
chip with 2.5V or 3.3V LVCMOS output capabilities. The
device features the capability to select either a differential
LVPECL or LVCMOS compatible input. The 18 outputs are
2.5V or 3.3V LVCMOS compatible and feature the drive
strength to drive 50⦠series or parallel terminated
transmission lines. With output-to-output skews of 150pS,
the ASM2I9940L is ideal as a clock distribution chip for the
most demanding of Synchronous systems. The 2.5V
outputs also make the device ideal for supplying clocks for
a high performance microprocessor based design.
With low output impedance (â20â¦), in both the HIGH and
LOW logic states, the output buffers of the ASM2I9940L
are ideal for driving series terminated transmission lines.
With 20⦠output impedance the ASM2I9940L has the
capability of driving two series terminated lines from each
output. This gives the device an effective fanout of 1:36.
The differential LVPECL inputs of the ASM2I9940L allow
the device to interface directly with a LVPECL fanout buffer
to build very wide clock fanout trees or to couple to a high
frequency clock source. The LVCMOS input provides a
more standard interface for applications requiring only a
single clock distribution chip at relatively low frequencies. In
addition, the two clock sources can be used to provide for a
test clock interface as well as the primary system clock. A
logic HIGH on the LVCMOS_CLK_Sel pin will select the
LVCMOS level clock input. All inputs of the ASM2I9940L
have internal pullup/pulldown resistor, so they can be left
open if unused.
The ASM2I9940L is a single or dual supply device. The
device power supply offers a high degree of flexibility. The
device can operate with a 3.3V core and 3.3V output, a
3.3V core and 2.5V outputs as well as a 2.5V core and
2.5V outputs. The 32-lead LQFP and TQFP Packages
were chosen to optimize performance, board space and
cost of the device. The 32-lead LQFP and TQFP Packages
have a 7x7mm2 body size with conservative 0.8mm pin
spacing.
* Pentium II is a trademark of Intel Corporation
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 ⢠Tel: 408-879-9077 ⢠Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
|
▷ |