W3079 Datasheet, PDF (6/12 Pages) Pulse A Technitrol Company – Ceramic Dual Band WLAN

Series: Antenna
Description: Ceramic Dual Band WLAN
PART NUMBER: W3079
RecommOeTnHdEeRd ASnPtEeCnnIFaICPAoTsIiOtiNonSon PCB
- The recommended antenna location is the center edge of the longer PCB
side.
- All measurement results of W3079 are measured on the 37x80mm evaluation
board with matching circuit (series 1.2pF capacitor).
- To construct a fine matching on customer PCB design, proper impedance
matching values should be obtained with a final customer PCB dimension,
surrounded metallic components, and a package condition (with final
assembly condition).
- The recommended minimum PCB size is around 35x35mm to obtain similar
RF performances of datasheet. For more discussion, please contact to Pulse
electronics.
1.2pF
Issue: 1622
In the effort to improve our products, we reserve the right to make changes judged to be necessary.
6
CONFIDENTIAL AND PROPRIETARY INFORMATION
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or
use without specific written authorization of Pulse is strictly forbidden.