W9908 Datasheet, PDF (5/6 Pages) Pulse A Technitrol Company – C-Clip Connector

C-Clip Connector
Pulse Part Number W9908
W9908 Connector Soldering
Recommendation for reflow soldering process
Printing stencil thickness 0.15 to 0.25 mm is recommended for the solder paste. The maximum soldering temperature
should not exceed 260°C.
The temperature profile recommendations for reflow solder process are presented in Figure 1 and 2. The reflow profile
presented in Figure 2 describes maximum reflow temperatures.
Figure 1 - Minimum temperature profile recommendation for reflow soldering process
5
pulseelectronics.com/products/antennas
L163.B (12/14)