W3064C Datasheet, PDF (5/20 Pages) Pulse A Technitrol Company – Dual Feed GNSS/2.4GHz Ceramic

Series: Ceramic
Description: Dual Feed GNSS/2.4GHz Ceramic
PART NUMBER: W3064C
MECHANICAL DRAWING
Test Setup for Electrical Measurements
Recommended test board- layout for electrical characteristic measurement
• Test board size 96 mm x 45 mm, PWB ground removal area 10.8 mm x 6.4 mm.
• GNSS antenna matching is done with 8.2nH shunt inductor, for Bluetooth a 1.0pF shunt
capacitor is used.
3D- view of Test Setup
• Test Setup: Antenna Positioned to the side-center location of test PCB 96mm long edge
GNSS
matching:
8.2nH shunt
inductor
Ceramic positioned
to the side-center
location on GP
Bluetooth
matching:
1.0pF shunt
capacitor
Issue: 1714
In the effort to improve our products, we reserve the right to make changes judged to be necessary.
5
CONFIDENTIAL AND PROPRIETARY INFORMATION
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or
use without specific written authorization of Pulse is strictly forbidden.