PE-0402CD1N0KTG Datasheet, PDF (5/5 Pages) Pulse A Technitrol Company – RF CHIP INDUCTORS

RF CHIP INDUCTORS
RF Chip Inductors
ALTERNATIVE INDUCTANCE & Q vs. FREQUENCY, HIGH SIDE METALLIZATION
Part
Number*
Inductance Optional
Q
SRF R_DC I_DC
(nH)
Tolerance
(MIN) (mHz MIN) (Ω MAX) (mA MAX)
1008CQ Series
PE-1008CQ3N0KTT 3.0 @ 50 MHz ±5% (J) 70 @ 1500 MHz 6000 0.04 1600
PE-1008CQ4N1KTT 4.1 @ 50 MHz ±5% (J) 75 @ 1500 MHz 6000 0.05 1600
PE-1008CQ7N8KTT 7.8 @ 50 MHz ±5% (J) 75 @ 1500 MHz 3800 0.05 1600
PE-1008CQ100KTT 10 @ 50 MHz ±5% (J) 60 @ 500 MHz 3600 0.06 1600
PE-1008CQ120KTT 12 @ 50 MHz ±5% (J) 70 @ 500 MHz 2800 0.06 1500
PE-1008CQ180KTT 18 @ 50 MHz ±5% (J) 62 @ 350 MHz 2700 0.07 1400
PE-1008CQ220KTT 22 @ 50 MHz ±5% (J) 62 @ 350 MHz 2050 0.07 1400
PE-1008CQ330KTT 33 @ 50 MHz ±5% (J) 75 @ 350 MHz 1700 0.09 1300
PE-1008CQ390KTT 39 @ 50 MHz ±5% (J) 75 @ 350 MHz 1300 0.09 1300
PE-1008CQ470KTT 47 @ 50 MHz ±5% (J) 75 @ 350 MHz 1450 0.12 1200
PE-1008CQ560KTT 56 @ 50 MHz ±5% (J) 75 @ 350 MHz 1230 0.12 1200
Part
Number*
Inductance Optional
Q
SRF R_DC I_DC
(nH)
Tolerance
(MIN) (mHz MIN) (Ω MAX) (mA MAX)
1008CQ Series (continued)
PE-1008CQ680KTT 68 @ 50 MHz ±5% (J) 80 @ 350 MHz 1150 0.13 1100
PE-1008CQ820KTT 82 @ 50 MHz ±5% (J) 80 @ 350 MHz 1060 0.16 1100
PE-1008CQ101KTT 100 @ 50 MHz ±5% (J) 62 @ 350 MHz 820 0.16 1000
PE-1008CQ121KTT 120 @ 50 MHz ±5% (J) 62 @ 350 MHz 800 0.17 1000
PE-1008CQ151KTT 150 @ 50 MHz ±5% (J) 60 @ 350 MHz 750 0.21 950
PE-1008CQ181KTT 180 @ 50 MHz ±5% (J) 40 @ 350 MHz 720 0.23 920
PE-1008CQ221KTT 220 @ 50 MHz ±5% (J) 35 @ 350 MHz 680 0.29 900
PE-1008CQ271K TT 270 @ 50 MHz ±5% (J) 35 @ 350 MHz 600 0.55 600
PE-1008CQ331KTT 330 @ 50 MHz ±5% (J) 35 @ 100 MHz 550 0.60 550
PE-1008CQ391KTT 390 @ 50 MHz ±5% (J) 35 @ 350 MHz 500 0.82 470
Surface Mount
*NOTE: Referenced part is Standard Tolerance, 10% (K). To order parts with optional tolerances, see the Part Number Ordering Guide below.
PART NUMBER ORDERING GUIDE ¹
(0402, 0603, 0805,1008,
1210 or 1206)
INDUCTANCE (nH)
Representative of the
inductance value
CORE MATERIAL
C = Ceramic (Alumina)
CD = Standard Range
CM = High Side Metallization
CQ = High Q
F = Ferrite
TOLERANCE
G = ±2%
J = ±5%
K = ±10%
M = ±20%
* TERMINATION
T = Tin or Gold plating
G= Gold plating only
S = Tin plating only
PACKAGING
T = Tape & Reel (7 or 13 reel)
SIZE QTY/REEL
0402 3000 pieces
0603 2000 pieces
0805 2000 pieces
1008 1600 pieces
1210 2000 pieces
1206 3000 pieces
1. To order directly from Pulse, see the addresses and telephone numbers on the back cover of this catalog.
Locate an authorized distributor or representative by going to the Pulse website.
GENERAL INFORMATION & SAMPLE KITS ¹
Inductor
Series
Standard
Size Format
Sold as
Parts/Reel
0402CD
0603CD
0402 (1005)
3000
0603 (1608)
2000
0805CD
1008CD
0805 (2012)
2000
1008 (2520)
1600
1. When ordering, specify the adjacent sample kit number.
Sample Kit
Number
PE-0402CDKIT-T
PE-0603CDKIT-T
PE-0805CDKIT-T
PE-1008CDKIT-T
Data
Sheet
WC701
WC701
WC701
WC701
G003.U (2/07)
www.pulseeng.com
13