JC0-0063NL Datasheet, PDF (5/5 Pages) Pulse A Technitrol Company – RoHS-5 peak wave solder temperature rating 235C

PULSEJACK^TM
2x1 RJ45
JC0-0019 / JC0-0019NL
10/100/1000
IC PHY
VCC
100 nF
MD3 +
MD3 -
MD2 +
MD2 -
MD1 +
MD1 -
MD0 +
MD0 -
100W
100W
100W
100W
MD0 -
MD0 +
MD1 -
MD1 +
MD2 -
MD2 +
MD3 -
MD3 +
100W
100W
100W
100W
VCC
100 nF
Application Circuit
pp
LOWER
9 7 5 3 1 Port
10 8 6 4 2
10 8 6 4 2
9 7 5 3 1 UPPER
Port
Resistor Network
www.pulseeng.com
50W
50W ^{10 nF}
PCB Layout Recommendations:
1. For maximum EMI suppression (electromagnetic interference)
place the decoupling capacitors adjacent to Vcc and 50Ω
connections.
2. Connections to ground should be as short as possible.
3. Connections between the 10/100/1000 IC and the connector
should be direct (ideally no change in direction) and of
minimum length.
For More Information:
Pulse Worldwide
Headquarters
12220 World Trade Dr.
San Diego, CA 92128
U.S.A.
www.pulseeng.com
TEL: [phone]
FAX: [phone]
Pulse European
Headquarters
Einsteinstrasse 1
D-71083 Herrenberg
Germany
TEL: [phone]
FAX: [phone]
Pulse China
Headquarters
B402, Shenzhen Academy of
Aerospace Technology Bldg.
10th Kejinan Rd.
High-Tech Zone
Nanshan District
Shenzen, PR China 518057
TEL: [phone]
FAX: [phone]
Pulse North China
Room 1503
XinYin Building
No. 888 YiShan Rd.
Shanghai 200233
China
TEL: [phone]
FAX: [phone]
Pulse South Asia
150 Kampong Ampat
#07-01/02
KA Centre
Singapore 368324
TEL: [phone]
FAX: [phone]
Pulse North Asia
No. 26
Kao Ching Rd.
Yang Mei Chen
Taoyuan Hsien
Taiwan, R. O. C.
32667
TEL: [phone]
FAX: [phone]
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2008. Pulse Engineering, Inc. All rights reserved.
www.pulseeng.com
5
J422.C (7/08)