DASUTWC500NF Datasheet, PDF (21/21 Pages) Pulse A Technitrol Company – Ultra-thin white radomeantenna for i-DAS

Series: CLARITY
Description: UltraThin, clear radome
antenna for iDAS
PART NUMBER: DASUTWCxxx
ASSEMBLY
If using the reflector, thread the reflector onto the Antenna Stem before
attaching the connectors. See Figure 2.
ADDITIONAL NOTES:
Some customers may chose to take into consideration the antenna
propagation orientation during their planning process. The Horizontal rotation
alignment mark (Phi=0 deg), along with data from iBwave file will support this.
For Optimum Performance, Metal ceiling rails need to be a minimum
200mm from the - antenna center as the antenna requires 400mm x 400mm
space free of any metal.
N Female: Maximum Torque 6.2-9.74 in-lbs (0.7-1.1Nm)
Mini-DIN: Maximum torque 12-16 ft Lbs (17-22Nm)
4.3-10 DIN: Maximum torque 45-70 in-lbs (5-8Nm)
Issue:1651
In the effort to improve our products, we reserve the right to make changes judged to be necessary.
21
CONFIDENTIAL AND PROPRIETARY INFORMATION
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or
use without specific written authorization of Pulse is strictly forbidden.