L145 Datasheet, PDF (2/4 Pages) Pulse A Technitrol Company – GPS L1 Band & GLONASS Ceramic Patch Antenna

GPS L1 Band & GLONASS
Ceramic Patch Antenna
Pulse Part Number W3216
No.
Item
Description
1
Feed Pin
Silver plated brass
2
Adhesive
0.13 mm thick double sided tape
Notes:
Feed pin manual soldering conditions:
• 300° C max soldering iron temperature, 5 seconds max
• Typical lead free solders are applicable
Electrode silver metallization may tarnish if antenna is stored/used in corro-
sive environment, especially where chloride, sulphur or sulfide, alkali or acid
salts exist in the air. Corrosive gases may cause oxidation of electrodes and
reduce solderability.
2
pulseelectronics.com/products/antennas
L145.A (05/12)