DASUTLC500NF Datasheet, PDF (13/15 Pages) Pulse A Technitrol Company – DAS, Ultra Thin, Low Clearance Antenna

Series: Clarity
Description: DAS, Ultra Thin, Low Clearance
Antenna
PART NUMBER: DASUTLC500NF
INSTALLATION INSTRUCTION
Drill or cut a hole 2.5-2.75 inches (64-70 mm) diameter at the
center of the ceiling tile or at the desired location. Slide the antenna
cable/connector assembly through the hole. Slide the Collar and Nut
onto the cable. Turn the Nut, tightening the antenna against the ceiling
tile. See Figure 1 and Figure 2
Issue: 1649
In the effort to improve our products, we reserve the right to make changes judged to be necessary.
13
CONFIDENTIAL AND PROPRIETARY INFORMATION
This document contains confidential and proprietary information of Pulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws.
Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or
use without specific written authorization of Pulse is strictly forbidden.