W3008C Datasheet, PDF (1/7 Pages) Pulse A Technitrol Company – Solutions for Mobile Phone Antennas

antennas
A wide array of Pulse antennas provide solutions to GSM, CDMA, WCDMA, LTE, TD-SCDMA, WiMax, WiFi TM, GPS, ZigBee^TM,
Bluetooth ^®, UWB, ISM, DVB-H, MediaFLO^TM, DMB-S, Satellite Radios, DECT and other custom applications.
Please pick from the charts at htttp://www.pulseelectronics.com/antennas/applications. Click on a part number to access the
corresponding data sheet. Contact Pulse for more information on products that are not covered in this catalog.
Antennas for mobile phones
Solutions for Mobile
Phone Antennas
Pulse´s customized antennas for mobile phones are based on a thorough knowledge of the design of modern handsets, the antenna
requirements, and the challenges of devices functioning in multi-radio environments.
Pulse has extensive experience in main antenna design and utilizes technologies such as sheet metals, flex radiators, LDS, and ceramic
solutions. Pulse products offer optimal and well-proven solutions for each application and form factor.
The product range for mobile phones includes main and complementary antennas and integrated antenna modules, including fully
tested speaker/antenna modules optimized for audio and RF performance.
Antennas for wireless devices
Antennas for Wireless
Access Point
Pulse’s new line of wireless access point antennas offers flexible and economical solutions for wireless device OEMs. These
antennas offer superior transmission and reception between wireless access points. They are compatible with IEEE 802.11a/b/g/n,
Bluetooth and ZigBee applications, as well as other products that utilize ISM frequency bands. All wireless access point antennas
are RoHS compliant. For high-volume orders, Pulse can custom design antennas for OEMs. This includes alternative frequencies and
a variety of cables/connectors for antenna assemblies. Pulse also manufactures build-to-print internal antennas that feature a variety
of stamped metal and PCB configurations.
Single-Band ^{1, 2}
NuPmarbt er F ^requency
Max Gain Mechanical
(dBi)
Length 3
Application/Standard
W1063
W1038ES
W1010 ⁴
W1030
W1034
W1037
W1038
W1027
SB24003
900MHz
900MHz
2.4GHz
2.4 GHz
2.4 GHz
2.4 GHz
2.4 GHz
2.4 GHz
2.4 GHz
3.0 6.65 /169
ISM 868 & 915MHz
3.0 6.65 /169
ISM 868 & 915MHz
2.0
3.3/83 802.11b/g/n, Bluetooth, ZigBee
2.0 3.25/82.5 802.11b/g/n, Bluetooth, ZigBee
2.0
4.21/107 802.11b/g/n, Bluetooth, ZigBee
3.2
6.65/169 802.11b/g/n, Bluetooth, ZigBee
4.9
6.65/169 802.11b/g/n, Bluetooth, ZigBee
3.2
4.88/124 802.11b/g/n, Bluetooth, ZigBee
2.14
2.5/132 802.11b/g/n, Bluetooth, ZigBee
1. Antennas come standard with R-SMA male connectors, unless otherwise
specified.
2. These part numbers are lead-free and RoHS compliant. No additional suffix
or identifier is required.
3. Inches/millimeters
4. SMA male connector
Dual-Band ^{1, 2}
NuPmarbt er ^Frequency
Max Gain
(dBi)
Mechanical
Length ³
Application/Standard
^W1043 2 ^{.4 & 5.0 2.0 4.59/117
W1045} 2 ^{.4 & 5.0 2.0 4.13/105}
W1028
5.15 & 5.85 2.0 4.88/124

R380.500.314 2.4 & 4.9 & 5.8 1.6/5 7.15/1822

802.11a/b/g/n, Bluetooth,
ZigBee
802.11a/b/g/n, Bluetooth,
ZigBee
802.11a/b/g/n, ISM 5.8GHz
ISM 5.8 GHz, Public Safety,
4.9 GHz, 802.11b/g/n,
Bluetooth, ZigBee
1. Antennas come standard with R-SMA male connectors, unless otherwise
specified.
Pulse Jack 2. These part numbers are lead-free and RoHS compliant. No additional suffix or
identifier is required.
3. Inches/millimeters
*Antennas for Wireless Access Point table is continued on next page
2
www.pulseelectronics.com
G003.Y (6/11)
Electronics