PL8600 Datasheet, PDF (1/1 Pages) Pulse A Technitrol Company – SMT POWER INDUCTORS

SMT POWER INDUCTORS
Toroid - Military/Aerospace POGO Series
Ruggedized header with POGO pins for secure board mounting
Current Rating: up to 8.3ADC
Inductance Range: 2.0µH to 336µH
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C
9
Part
Number
Inductance
@ Irated
(µH MIN)
Irated
(A)
DCR (MAX)
(mΩ)
ET
(V-µsec)
POGO 25
PL8600
PL8601
PL8602
PL8600
PL8603
PL8601
PL8604
PL8605
PL8602
PL8606
PL8603
PL8607
PL8604
PL8608
PL8605
PL8609
PL8606
PL8607
PL8608
PL8609
2.0
2.4
5.0
7.0
9.3
8.4
14.1
19.8
17.9
29.3
33.8
42.6
50.9
61.3
71.5
84.2
106.1
154.2
218.9
295.0
8.30
8.0
7.20
10.9
5.20
19.0
4.16
16.0
3.80
30
3.78
21.8
3.10
45.5
2.60
66.5
2.60
38.0
2.20
101
1.89
60
1.80
151
1.54
91
1.50
222
1.30
133
1.20
318
1.07
202
0.89
302
0.74
444
0.64
636
7.31
7.81
11.72
14.61
16.12
15.62
19.73
23.45
23.43
28.50
32.25
34.49
39.46
40.85
46.90
46.22
57.00
68.99
81.70
92.43
NOTES:
1. Temperature rise is 50°C in typical buck or boost circuits at 250kHz and with the
reference ET applied to the inductor.
2. Total loss in the inductor is 380mWatts for a 50°C temperature rise above ambient.
3. To estimate temperature rise in a given application, determine copper and core
losses, divide by 380 and multiply by 50.
4. For the copper loss, calculate IDC² X RN.
5. For core loss, using frequency (f) and operating flux density (B),
calculate 6.11 x 10^-18 x B^2.7 x f^2.04.
Inductance
@0ADC
(µH ±10%)
100 Gauss
ET100
(V-µsec)
1 Amp DC
H1
(Orsted)
Connection
2.2
2.6
5.5
8.75
10.4
10.4
15.7
22.1
22.45
32.8
41.7
47.6
62.8
67.5
88.2
91.0
131.0
190.3
270.2
364.0
1.20
1.33
1.93
2.41
2.65
2.65
3.25
3.86
3.86
4.70
5.30
5.66
6.51
6.75
7.71
7.83
9.40
11.33
13.50
15.66
5.43
5.97
8.69
10.86
11.95
11.95
14.66
17.38
17.38
21.18
23.89
25.52
29.32
30.41
34.75
35.30
42.36
51.05
60.82
70.59
Parallel
Parallel
Parallel
Series
Parallel
Series
Parallel
Parallel
Series
Parallel
Series
Parallel
Series
Parallel
Series
Parallel
Series
Series
Series
Series
6. For flux density (B), calculate ET (V-µsec) for the application, divide by ET100 from
the table, and multiply by 100.
7. Limit the DC bias (H) to 46 orsteds. Calculate H by multiplying H1 from the table
by IDC of the application.
8. The maximum DCR listed is approximately 17% over the nominal DCR.
9. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to
the part number (i.e. PL8600 becomes PL8600T). Pulse complies to industry
standard tape and reel specification EIA481.
Mechanical
Schematic
.525
13,34
MAX
3
2
.625
15,88
MAX
4
1
For More Information:
.400
10,16
.004/0,10
4 SURFACES
.310
7,87
MAX
.500
12,70
.235
5,97
SUGGESTED PAD LAYOUT
1
4
4X ^.080
2,03
2
3
1:1 ±2%
.500
12,70
Pan & Tube . . . . . . . . .30/tube
Tape & Reel . . . . . . . .300/reel
MSL . . . . . . . . . . . . . . . . . . . .3
.400
10,16
Dimensions: ^Inches
mm
Unless otherwise specified,
all tolerances are ± ^.010
0,25
Pulse Worldwide Pulse
Pulse
Pulse
Pulse North China Pulse South Asia Pulse North Asia
Headquarters
Northern Europe
Southern Europe China Headquarters Room 1002
150 Kampong Ampat 3F-4, No. 81, Sec. 1
2 Pearl Buck Court
Bristol, PA 19007
U.S.A.
www.pulseeng.com
TEL: [phone]
FAX: [phone]
3 Huxley Road
Surrey Research Park
Guildford, Surrey GU2 5RE
United Kingdom
TEL: [phone]
FAX: [phone]
Zone Industrielle
F-39270
Orgelet
France
TEL: [phone]
FAX: [phone]
No. 1
Industrial District
Changan, Dongguan
China
TEL: [phone]
FAX: [phone]
No. 819
Nanjing West Rd
Shanghai
China
TEL: [phone]
FAX: [phone]
#07-01/02
KA Centre
Singapore 368324
TEL: [phone]
FAX: [phone]
Hsin Tai Wu Road
Hsi-Chih
Taipei Hsien
Taiwan
TEL: [phone]
FAX: [phone]
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners.
© Copyright, 2005. Pulse Engineering, Inc. All right reserved.
www.pulseeng.com
M114.A (10/05)