PL1960 Datasheet, PDF (1/1 Pages) Pulse A Technitrol Company – SMT GATE DRIVE TRANSFORMERS

SMT GATE DRIVE TRANSFORMERS
1500VDC Basic and Operational Insulation
Storage Temperature: -55°C to +130°C
500Vdc isolation between gate and drive.
Basic insulation(1.4mm creepage/clearance) and operational available.
Maximum Reflow Temperature: 235°C (245°C for RoHS compliant)
Moisture Sensitivity Level (MSL): 1
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C ⁵
Part
Number
Turns Ratio
Pri-Sec
Insulation
(Vdc)
MAX
(v* usec)
Primary
Inductance
(uH MIN)
Leakage
Inductance
(uH MAX)
DCR
Primary
(Ω MAX)
DCR
Secondary Package Size
(Ω MAX)
PL1960
1:1
1500.00
9.700
785.0
0.46
0.60
0.6
8.6x6.7x2.5
NOTES:
1.The maximum volt-μsec rating limits the peak flux density to 2200 Gauss when
used in a unipolar drive application. For bi-polar drive applications a maximum
volt-μsec of two times this rating is acceptable (ie: 2* (volt*μsec rating) Volt*μsec
= (voltage applied to the primary) * dutycycle / Frequecy = V * alpha / Freq_Hz =
V * μsec
2. Leakage inductance is measured at primary terminals with all secondaries
shorted.
3.Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part
number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard
tape and reel specification EIA481.
4.The “NL” suffix indicates an RoHS-compliant part number. Non-NL suffixed parts
are not necessarily RoHS compliant, but are electrically and mechanically equiva-
lent to NL versions. If a part number does not have the “NL” suffix, but an RoHS
compliant version
5. The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.

.340
8,64
MAX
Mechanical
Schematic
.070
1,77
4X
.100
2,54
.265
6,73
MAX
.140
3,56
MAX
.005/0.13
4 SURFACES
.220
5,58
.320
8,12
.200
5,08
.100
2,54
SUGGESTED PAD LAYOUT
Weight . . . . . . . . . . . . . . 0.28 grams
Tape & Reel . . . . . . . . . . . . 1500/reel
Tube . . . . . . . . . . . . . . . . . . 60/tube
Dimensions: ^Inches
mm
Unless otherwise specified,
all tolerances are ± .010
0,25
For More Information:
Pulse Worldwide
Headquarters
Two Pearl Buck Court
Bristol, PA 19007
U.S.A.
www.pulseeng.com
Tel: [phone]
Fax: [phone]
Pulse Europe
Einsteinstrasse 1
D-71083 Herrenberg
Germany
Tel: [phone]
Fax: [phone]
Pulse China Headquarters Pulse North China Pulse South Asia
B402, Shenzhen Academy of Room 2704/2705
135 Joo Seng Rd.
Aerospace Technology Bldg. Super Ocean Finance Ctr. #03-02
10th Kejinan Rd.
2067 Yan An Rd. West PM Industrial Bldg.
High-Tech Zone
Shanghai 200336
Singapore 368363
Nanshan District
China
Shenzen, PR China 518057
Tel: [phone]
Tel: [phone]
Tel: [phone]
Fax: [phone]
Fax: [phone]
Fax: [phone]
Pulse North Asia
No. 26, Kao Ching Rd.
Yang Mei Chen
Taoyuan Hsien
Taiwan
R. O. C.
Tel: [phone]
Fax: [phone]
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product
names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2010. Pulse Engineering, Inc. All rights reserved.
www.pulseeng.com
M149.A (8/10)