PL10100 Datasheet, PDF (1/4 Pages) Pulse A Technitrol Company – SMT POWER INDUCTORS

SMT POWER INDUCTORS
Military/Aerospace Grade
Height: 7.4mm Max
Footprint: 19.8mm x 19.6mm Max
Current Rating: up to 73A
Inductance Range: .405µH to 6.2µH
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C ⁸

Part Number ^5,7

In_(@µd_HuIrc_±at1at_5en%dc)e _{Ir(aAtdec d) 1 T YP DCR ( mΩ) MA} X
Inductance
Saturation Current ²
@ 0 Adc
(µH ±15%)
25°C 100°C
2-Turn (Low - Loss) Series
PL10100
0.45
73
.38 .48
0.45
95 80
PL10101
0.63
54
.38 .48
0.65
63 53
PL10102
0.85
39
.38 .48
0.91
46 37
PL10103
1.05
30
.38 .48
1.10
35 30
PL10104
1.25
25
.38 .48
1.30
29 26
PL10105
1.45
21
.38 .48
1.50
24 22
2-Turn Series

PL10106
0.45
52
.78 .98
0.45
95 80
PL10107
0.63
52
.78 .98
0.65
63 53
PL10108
0.85
39
.78 .98
0.91
46 37
PL10109
1.05
30
.78 .98
1.10
35 30
PL10110
1.25
25
.78 .98
1.30
29 26
PL10111
1.45
21
.78 .98
1.50
24 22
3-Turn Series
PL10112
0.95
42
1.15 1.43
1.0
68 54
PL10113
1.40
36
1.15 1.43
1.5
43 35
PL10114
1.90
25
1.15 1.43
2.0
29 25
PL10115
2.40
20
1.15 1.43
2.5
23 21
PL10116
2.80
15
1.15 1.43
3.0
18 16
PL10117
3.40
12
1.15 1.43
3.5
15 13
4-Turn Series
PL10118
1.60
37
1.44 1.80
1.60
55 43
PL10119
2.40
30
1.44 1.80
2.42
35 27
PL10120
3.30
17
1.44 1.80
3.60
20 18
PL10121
4.00
14
1.44 1.80
4.40
16 15
PL10122
4.90
11
1.44 1.80
5.34
13 12
PL10123
5.80
9
1.44 1.80
6.20
11 10
Heating ³
Current
(A)
73
73
73
73
73
73
52
52
52
52
52
52
42
42
42
42
42
42
37
37
37
37
37
37
NOTES:
1. The rated current as listed is either 85% of the saturation current or the heating current, depending on 4. In high volt*time applications, additional heating in the component can occur due to core losses in
which value is lower.
the inductor which may neccessitate derating the current in order to limit the temperature rise of
2. The saturation current is the current which causes the inductance to drop by 15% at the stated ambient
temperatures (25°C and 100°C). This current is determined by placing the component in the specified
ambient environment and applying a short duration pulse current (to eliminate self-heating effects)
the component. In order to determine the approximate total losses (or temperature rise) for a
given application, the total copper and core losses should be taken into account. For approximate
value of core losses, in a given application, use the core loss graph on page 24.
to the component.
5. Optional Tape & Reel packaging can be ordered by adding a “T”
3. The heating current is the DC current which causes the temperature of the part to increase by approxi- ^{suffix to the part number (i.e. PL10118 becomes PL10118T). Pulse complies to industry standard tape and}
mately 45°C. This current is determined by mounting the component on a PCB with .25” wide, 2 oz. ^{reel specification EIA481.}
equivalent copper traces, and applying the current to the device for 30 minutes with no forced air 6. Meets solderability test per IPC/EIA J-STD-002B using flux type ORL0.
cooling.
7. The temperature of the component (ambient plus temperature rise) must be within the stated
opeating temperature range.
1
pulseelectronics.com
M194.B (1/13)