PE-68386T Datasheet, PDF (1/5 Pages) Pulse A Technitrol Company – SMT Gate Drive Transformers

SMT Gate Drive Transformers
>1500VDC Basic and Functional Insulation
>1500VDC isolation between Gate and Drive
Basic insulation (1.4mm creepage/
clearance) and functional available
Operating frequency: 50kHz and up
Part ^3,4
Turns
Number
Ratio
Functional Insulation
Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C ⁵
Pri-Sec
Insulation
(VDC)
MAX ¹
V*µsec
Primary
Inductance
(µH MIN)
Leakage ²
Inductance
(µH MAX)
DCR
Primary
(Ω MAX)
DCR
Secondary
(Ω MAX)
Package Size
(L x W x H)
(mm MAX)
PE-68386NL
1:1
1500 Vrms
9.7
785
0.46
0.60
0.60
8.6 x 6.7 x 2.5
P0926NL
1:1:1
1500 Vrms
23.8
300
0.50
2.00
2.00
8.0 x 6.6 x 5.3
P0544NL
1:1:1
1500 Vrms
45.1
3300
0.70
1.60
1.60
9.0 x 8.6 x 7.6
PA0264NL
1:1:1
1500 Vrms
12.7
1140
0.65
0.75
0.75
8.6 x 6.7 x 3.6
PA1323NL
1:1
1500 Vrms
21.7
600
2.0
1.25
1.25
9.5 x 7.0 x 5.3
Basic Insulation (1.4mm creepage and clearance between Primary and Secondary)
PA0173NL
1:1:1
1500 Vrms
17.2
980
0.75
0.62
0.88
11.8 x 8.8 x 4.0
PA0185NL
1:1
1500 Vrms
17.2
980
0.75
0.88
0.62
11.8 x 8.8 x 4.0
PA0184NL
1:1
1500 Vrms
27.2
1200
0.50
0.91
0.91
9.0 x 8.6 x 7.6
PA2777NL
1:1
1500 Vrms
9.3
335.2
0.36
0.70
0.70
7.1 x 6.1 x 5.5
PA0510NL
2.5:1:1
1500 Vrms
27.2
1200
0.68
0.91
0.380
9.0 x 8.6 x 7.6
PA3493NL
1.25:1
1650 Vdc
23
656
1.3
1.03
0.85
10.9 x 9.7 x 2.7
Notes:
1. The Maximum volt-µsec rating limits the peak flux density to 2200 Gauss when
used in a unipolar drive application. For bi-polar drive applications, a maximum
volt-sec of two times this rating is acceptable (ie: 2* (volt*µsec rating) = (voltage
applied to the primary) * dutycycle / Frequency = V * alpha / Freq_Hz = V * µsec
2. Leakage inductance is measured at primary terminals with all secondaries shorted.
3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part
number (i.e. P0544NL becomes P0544NLT). Pulse complies to industry standard
tape and reel specification EIA481.
4. The “NL” suffix indicates an RoHS-compliant part number. Non-NL suffixed parts are not
necessarily RoHS compliant, but are electrically and mechanically equivalent to NL versions.
If a part number does not have the “NL” suffix, but an RoHS compliant version is required,
please contact Pulse for availability.
5. The temperature of the component (ambient plus temperature rise) must be within the
stated operating temperature range.
113
pulseelectronics.com
SPM2007 (05/13)