PA4320.103NLT Datasheet, PDF (1/2 Pages) Pulse A Technitrol Company – Shielded Drum Core Inductor

Pulse Jack
Shielded Drum Core Inductor
PA4320 Series
Height: 10.0 Max
Electronics
Footprint: 12.3mm x 12.3mm Max
Current Rating: up to 7.6A
Inductance Range: 10uH to 1000uH
PART NUMBER
PA4320.103NLT
PA4320.153NLT
PA4320.223NLT
PA4320.473NLT
PA4320.104NLT
PA4320.154NLT
PA4320.334NLT
PA4320.105NLT
Inductance
100 KHz, 100 mV
(uH±20%)
10
15
22
47
100
150
330
1000
Electrical Specifications @ 25°C — Operating Temperature -40°C to 125°C
Rated
Current
(A)
DCR
(mOHMS MAX)
Saturation Current (Typical) A²
10% Drop 20% Drop 30% Drop
7.6
16
9.6
11.5
12.5
7.0
22
8.3
9.9
10.7
5.6
30
6.8
8.1
8.8
4.2
56
4.5
5.4
5.8
2.8
125
3.1
3.7
4.0
2.3
185
2.6
3.1
3.4
1.7
340
1.7
2.1
2.2
1.0
960
0.98
1.2
1.3
Heating Current ³
20°C Rise 40°C Rise
5.4
7.6
4.8
7.0
4.0
5.6
3.0
4.2
2.0
2.8
1.6
2.3
1.2
1.7
0.69
1.0
NOTES:
1. Actual temperature of the component during system operation (ambient plus temperature rise) 3. The Rated Current is the DC current required to raise the component temperature by the value
must be within the standard operating range.
shown. Take note that the component’s performance varies depending on the system condition.
2. The Saturation Current is the current at which the initial inductance drops approximately by the
amount shown at the stated ambient temperature. This current is determined by placing the
It is suggested that the component be tested at the system level, to verify the temperature rise
of the component during system operation.
component in the specified ambient environment and applying a short duration pulse current
(to eliminate self-heating effect) to the component.
PA4320.XXXNLT
Mechanical
Schematic
1
pulseelectronics.com
P787.A (09/16)