PA2983.230HLT Datasheet, PDF (1/2 Pages) Pulse A Technitrol Company – Power Beads - PA2983.XXXHL Series

SMT Power Inductors
Power Beads - PA2983.XXXHL Series
Current Rating: Over 52Apk
Inductance Range: 23nH to 65nH
Height: 4.0mm Max
Footprint: 4.0mm x 5.0mm Max
Halogen Free
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C
Part
Number
Inductance¹
@ 0ADC
(nH +/- 15%)
Inductance
@ Irated
(nH TYP)
Irated²
(ADC)
DCR³
(mΩ nominal)
Saturation Current⁴
(A TYP)
25°C
100°C
Heating Current⁵
(A TYP)
PA2983.230HLT
23
23
30
0.33+/- 10%
75+
52
30
PA2983.650HLT
65
60
24
0.33 +/- 10%
29.5
24
30
Notes:
1. Inductance is measured at 100kHz, 100mVrms.
6. In high volt*time applications, additional heating in the component can occure due to
2. The rated current as listed is either the saturation current or the heating current
core losses in the inductor which may necessitate derating the current in order to limit
depending on which value is lower.
the temperature rise of the component. To determine the approximate total losses (or
3. The nominal DCR is measured from point a to b , as shown below on the
temperature rise) for a given application, the coreloss and temperature rise curves can
mechanical drawing.
be used.
4. The saturation current is the typical current which causes the inductance to drop 7. The “T” suffix indicates the part is shipped in tape and reel packaging. Pulse complies to
by 20% at the stated ambient temperatures (25°C, 100°C). This current is determined the industry standard type and reel specification EIA481. The tape and reel for this product
by placing the component in the specified ambient environment and applying a
has a width (W=12mm), pitch (Po=0.8mm) and depth (Ko=12mm).
short duration pulse current (to eliminate self-heating effects) to the component. 8. The temperature of the component (ambient plus temperature rise) must be within the
5. The heating current is the DC current which causes the part temperature to increase stated operating temperature range.
by approximately 40°C when used in a typical application.
PA2983.XXXHLT
.158 MAX.
[4.0 MAX.]
Mechanical
.060
[1.5]
Schematic
1
.079
[2.0]
XXXHL
.158 MAX.
[4.0 MAX.]
2X .038 ± .008
[1.0 ± 0.2]
.197 MAX.
[5.0 MAX.]
.106/
2
2.7
SUGGESTED PAD LAYOUT
.059 ± .004
[1.5 ± 0.1]
Weight .................................0.8 grams
Tape & Reel ..........................1200/reel
Dimensions:
Inches
mm
Unless otherwise specified, all tolerances are ± ^.010
0,25
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998
1
pulseelectronics.com
Shanghai 86 21 62787060
China 86 755 33966678 Taiwan 886 3 4356768
P697.B (03/14)