English
Language : 

PA2742NL Datasheet, PDF (1/7 Pages) Pulse A Technitrol Company – SMT Common Mode Chokes
Pulse Jack
SMT Common Mode Chokes
1.0A to 20.0A
Electronics
Wide variety of package sizes available
1Arms to 20Arms current rating
Inductances from 61uH to 10mH
1500Vrms Hi-pot
Part Number
PA2742NL
Inductance4
per Winding
(uH +30%/-35%)
397
Electrical Specifications at 25 deg C Temp Range -40 ° C to 130 ° C
Irated1
(Arms or Adc)
DCR per Winding
(mΩ Max)
Leakage Inductance
(uH Min)
1
92
0.6
Package Name
High Shasta
Package Size
LxWxH
(mm Max)
9.1 x 8.9 x 7.9
PA2741NL
94
1.1
30
0.3
Low Shasta
9.1 x 8.9 x 3.8
PA2752NL
10150
1.4
210
25
LCCI-50
19.6 x 17.0 x 9.9
PA2748NL
1125
1.8
55
3
Polecat
12.7 x 13.2 x 5.6
PA3927NL
800
3
27
1.5
Polecat
13x13x8.6
PA2743NL
383*
3.3
18
1
Polecat
13.0 x 13.0 x 5.6
PA2749NL
536
3.8
17.1
1.2
LCCI-37
16.4 x 14.2 x 8.9
PA2744NL
280
4
13.2
0.7
Polecat
13.0 x 13.0 x 5.6
PA2751NL
486
4.2
16
1
LCCI-44LP
18.2 x 15.0 x 7.6
PA2745NL
130*
5
6.75
0.4
Polecat
13.2 x 13.2 x 5.6
PA2746NL
96*
6
4.3
0.25
Polecat
13.2 x 13.2 x 5.6
PA2750NL
400
6
9.4
1.25
LCCI-44
18.2 x 15.0 x 10.0
PA2747NL
61*
7
2.9
0.15
Polecat
13.5 x 13.5 x 5.6
PA2756NL
484
8
7.7
1.5
LCCI-50
19.6 x 17.0 x 9.9
PA2757NL
1030
9
9.75
3
HCCI-80
31.0 x 25.4 x 12.7
PA2754NL
215
10
3.75
0.5
Makeni
21.1 x 19.1 x 11.2
PA2753NL
95
12.5
3
0.15
LCCI-50
19.6 x 17.0 x 9.9
PA2755NL
117
14
1.95
0.3
Makeni
21.1 x 19.1 x 11.2
PA2670NL
500
16
4.25
1.5
HCCI-80
31.0x25.4x12.7
PG1265NL
380
20
4.1
1.2
HCCI-80
31.0x25.4x12.7
NOTE:
1. The current rating (Irated) is based upon the temperature rise of the component and represents the rms current which will cause a typical temperature rise of 40C.
2. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range.
3. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e. PA2741NL becomes PA2741NLT). Pulse complies to industry standard tape and reel specification EIA481.
4. Components identified by an asterisk have an inductance tolerance of +/- 35%. All other components are +30/-35%.
1
pulseelectronics.com
P688.G (02/16)