PA2083NL Datasheet, PDF (1/2 Pages) Pulse A Technitrol Company – Power Beads - PA2083NL Series

SMT Power Inductors
Power Beads - PA2083NL Series
Current Rating: Over 90Apk
Inductance Range: 70nH to 205nH
Height: 7.0mm Max
Footprint: 7.6mm x 7.4mm Max
Electrical Specifications @ 25°C - Operating Temperature -40°C to +130°C ⁷
Inductance
Inductance
Part
@ 0ADC
@ Irated
Irated ¹
DCR²
Number
(nH ±10%)
(nH TYP)
(ADC)
(mΩ)
Saturation Current³
(A TYP)
25°C
100°C
Heating ⁴
Current
(A TYP)
PA2083.700NL *
70
70
27
93
75
PA2083.101NL *
105
105
27
61
54
PA2083.121NL *
120
120
27
55
0.60 ±8%
48
27
PA2083.161NL *
160
160
27
41
38
PA2083.181NL *
185
170
27
36
33
PA2083.201NL *
205
177
27
32
29
Notes:
1. The rated current as listed is either the saturation current or the heating current depending 5. In high volt*time applications, additional heating in the component can occur due to
on which value is lower.
core losses in the inductor which may necessitate derating the current in order to limit
2. The nominal DCR is measured from point a to point b , as shown on the mechanical
the temperature rise of the component. To determine the approximate total losses (or
drawing below.
temperature rise) for a given application, the coreloss and temperature rise curves can
3. The saturation current is the typical current which causes the inductance to drop by 20% at be used.
the stated ambient temperatures (25°C and 100°C). This current is determined by placing the 6. Optional tape and reel packaging can be ordered by adding a “T” suffix to the part
component in the specified ambient environment and applying a short duration pulse
number (i.e. PA2083.700NL becomes PA2083.700NLT). Pulse complies to industry
current (to eliminate self-heating effects) to the component.
standard tape and reel specification EIA481.
4. The heating current is the DC current which causes the part temperature to increase by 7. The temperature of the component (ambient plus temperature rise) must be within the
approximately 40°C.
stated operating temperature range.
* Contact Pulse for availability
Mechanical
Schematic
PA2083.XXXNL
D/C CTRY
Weight ................................1.5 grams
Tape & Reel .........................500/reel
Dimensions:
Inches
mm
Unless otherwise specified, all tolerances are ± ^.010
0,25
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998
1
pulseelectronics.com
Shanghai 86 21 62787060
China 86 755 33966678 Taiwan 886 3 4356768
P659.E (03/14)