PA1320NL Datasheet, PDF (1/2 Pages) Pulse A Technitrol Company – SMT POWER INDUCTORS Power Beads

SMT POWER INDUCTORS
Power Beads - PA1320NL _Series
Current Rating: Over 75Apk
Inductance Range: 120nH to 300nH
Height: 6.5mm Max
Footprint: 10.4mm x 8.0mm Max
Part
Number
Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C ⁷
Inductance
@0ADC
(nH ±20%)
Inductance
@Irated
(nH TYP)
Irated ¹
(ADC)
DCR ²
(mΩ)
Saturation Current ³
(A TYP)
25°C
100°C
Heating ⁴
Current
(A TYP)
PA1320.121NL
120
120
40
77
65
PA1320.171NL
172
160
40
58
51
0.48 ±8%
40
PA1320.221NL
215
200
40
43
39
PA1320.301NL
310
230
31
31
27
NOTES:
1. The rated current as listed is either the saturation current or the heating
current depending on which value is lower.
ing the component on a typical application PCB, and then applying the
current to the device for 30 minutes with 25LFM of forced air cooling.
2. The nominal DCR tolerance is by design. The nominal DCR is measured
from point a to point b , as shown below on the mechanical drawing.
3. The saturation current is the typical current which causes the inductance
to drop by 20% at the stated ambient temperatures (25°C and 100°C).
This current is determined by placing the component in the specified
ambient environment and applying a short duration pulse current
(to eliminate self-heating effects) to the component.
4. The heating current is the DC current which causes the part temperature
to increase by approximately 40°C. This current is determined by solder-
5. In high volt*time applications, additional heating in the component can
occur due to core losses in the inductor which may neccessitate derating
the current in order to limit the temperature rise of the component. To
determine the approximate total losses (or temperature rise) for a given
application, the coreloss and temperature rise curves can be used.
6. Pulse complies to industry standard tape and reel specification EIA481.
7. The temperature of the component (ambient plus temperature rise) must
be within the stated operating temperature range.
Mechanical
1.401,401MAX
.256
6,50
PA1320.XXXNL
Date Code
Country of Origin
.315
8,00
MAX
.421
10,70
.945 ± .012
24,00 ± 0,30
.256
6,50
MAX
a
2X
.100
2,54
b
.088
2,24
TAPE & REEL
.323
LAYOUT
8,20
.472
12,00
USER DIRECTION
OF FEED
Schematic
.110
2,79
.120
3,05
.290
7,37
SUGGESTED PAD LAYOUT
Weight . . . . . . . . . .2.05 grams
Tape & Reel . . . . . . . .750/reel
1
Dimensions: ^Inches
mm
Unless otherwise specified,
all tolerances are ± ^.010
0,25
2
USA 858 674 8100 • Germany 49 7032 7806 • Singapore 65 6287 8998 • Shanghai 86 21 54643211 / 2 • China 86 769 85538070 • Taiwan 886 3 4641811
www.pulseeng.com
P653.A (11/06)