J00-0061NL Datasheet, PDF (1/3 Pages) Pulse A Technitrol Company – RoHS peak wave solder temperature rating 260°C Suitable for CAT 5 & 6 Fast Ethernet Cable or better utp

PulseJack™
1x1 Tab-DOWN RJ45
Description:
10/100 Base-TX RJ45 1x1 Tab-DOWN 8-pin Integrated Magnetics Connector, designed to support high volume
cost-conscious consumer applications such as: ADSL modems, Cable modems, STB and Video on Demand.
Features and Benefits:
RoHS peak wave solder temperature rating 260°C
Suitable for CAT 5 & 6 Fast Ethernet Cable or better
UTP
Meets IEEE 802.3 specification
350µH minimum OCL with 8mA bias current
High performance for MAX EMI suppression for
cost-conscious applications
RoHS
Compliant
Part Number
J00-0051NL
J00-0062NL
J00-0063NL
10 Base-T Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C
Turns
Data
Ratios
EMI
Rate
Fingers
TX RX
Insertion Return Loss
Common Mode Hipot
Loss
(dB MIN) Crosstalk
Rejection
(Vrms)
LEDs BST ^{(dB MAX) 100Ω ± 15Ω (dB MIN)}
(dB MIN)
(L/R)
1-10MHz 1-10MHz
1-10MHz
5MHz @60Hz 1 MIN
10BT 1CT:2.5 1CT:1 Yes
G/Y
No
-1
-15
-30
-25
1500
10BT 1CT:2.5 1CT:1
No
None No
-1
-15
-30
-25
1500
10BT 1CT:2.5 1CT:1
No
G/Y
No
-1
-15
-30
-25
1500
RoHS Data
Compliant Rate
Part Number
J00-0014NL 100BT
J00-0042NL 100BT
J00-0045NL 100BT
J00-0061NL 100BT
J00-0065NL 100BT
J00-0066NL 100BT
Turns
Ratios
TX RX
1CT:1 1CT:1
1CT:1 1CT:1
1CT:1 1CT:1
1CT:1 1CT:1
1CT:1 1CT:1
1CT:1 1CT:1
10/100 Base-T Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C
EMI LEDs
Fingers (L/R)
Insertion
Loss
BST ^{(dB MAX)}
Return Loss
(dB MIN)
100Ω ± 15Ω
Crosstalk
(dB MIN)
Common Mode Hipot
Rejection (Vrms)
(dB MIN)
1- 1-1 10- 30- 60- 1- 30- 60- 1- 50- @60Hz
65MHz 0MHz 30MHz 60MHz 80MHz 30MHz 60MHz 100MHz 50MHz 150MHz 1 MIN
No None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
No None No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
No G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
Yes None Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
Yes G/Y Yes -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
Yes G/Y No -1 -18 -14 -12 -10 -35 -35 -30 -20 -15 1500
Notes:
1. For an explanation of EMI fingers, refer to the mechanical drawing page
2. LEDs Left/Right: G=green, Y=yellow
3. IEEE802.3i (10Base-T) standard does not require these parts to achieve 350µH minimum OCL with 8mA bias current for 10Base-T parts.
USA 858 674 8100 Germany 49 7032 7806 0 Singapore 65 6287 8998
1
pulseelectronics.com
Shanghai 86 21 62787060
China 86 755 33966678
Taiwan 886 3 4356768
J414.F (07/12)