CD5.241 Datasheet, PDF (4/22 Pages) PULS GmbH – DC/DC Converter

CD-Series
CD5.241
DC/DC Converter 24V, 5A
3. INPUT VOLTAGE
Input voltage
Input voltage range
nom.
max.
DC 24V
18.0-32.4Vdc
14.4-18.0Vdc
36.0Vdc
Allowed voltage between input
and earth
Allowed input ripple voltage
max.
max.
60Vdc or
42.2Vac
5Vpp
Turn-on voltage
Shut-down voltage
Input current
Start-up delay
Rise time
Turn-on overshoot
Input capacitance
typ.
typ.
typ.
typ.
typ.
typ.
typ.
max.
typ.
17.5Vdc
14.0Vdc
35.0Vdc
5.5A
650ms
80ms
150ms
500mV
3 000μF
full specified
maximal 60 seconds or with de-rating see Fig. 3-2
absolute maximum continuous input voltage with no
damage to the DC/DC converter
in case the output voltage is not grounded.
47Hz-500Hz, the momentary input voltage must always
be within the specified limits.
steady-state value, see Fig. 3-1
steady-state value, see Fig. 3-1
steady-state value, see Fig. 3-1
at 24Vdc input and output 24V, 5A, see Fig. 3-4
see Fig. 3-1
0mF, 24V, constant current load 5A, see Fig. 3-3
5mF, 24V, constant current load 5A, see Fig. 3-3
see Fig. 3-3
external capacitors on the input voltage bus are allowed
without any limitations.
Fig. 3-1 Input voltage range
P_OUT
Rated input range
V_IN
Fig. 3-3 Turn-on behavior, definitions
Input
Voltage
Output
Voltage
- 5%
Start-up Rise
delay Time
Fig. 3-2 Allowable output current below 18V
input voltage
Output Current
6A
5
4
3
2
1
0
14 16
(a)
(b)
(a) Ambient < 45°C
(b) Ambient < 60°C
Input Voltage
18 20
22 24Vdc
Fig. 3-4 Input current vs. output load
8A
Input
Current,
typ.
6
4
InpInupt:u1t8: ^V2d4cVdc
2
Output Current
0
1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6A
Mar. 2016 / Rev. 1.5 DS-CD5.241-EN
All parameters are specified at 24V, 5A, 24Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
4/22