CD5.241-L1 Datasheet, PDF (4/21 Pages) PULS GmbH – DC/DC Converter

CD-Series
CD5.241-L1
DC/DC Converter 24V, 3.8A
3. INPUT VOLTAGE
Input voltage
Input voltage range
nom.
max.
DC 24V
14.4-32.4Vdc
36.0Vdc
Allowed voltage between input
and earth
Allowed input ripple voltage
max.
max.
Turn-on voltage
Shut-down voltage
Input current
Start-up delay
Rise time
Turn-on overshoot
Input capacitance
typ.
typ.
typ.
typ.
typ.
typ.
typ.
max.
typ.
60Vdc or
42.2Vac
5Vpp
17.5Vdc
14.0Vdc
35.0Vdc
4.25A
290ms
520ms
610ms
500mV
3 000μF
full specified
absolute maximum continuous input voltage with no
damage to the DC/DC converter
in case the output voltage is not grounded.
47Hz-500Hz, the momentary input voltage must always
be within the specified limits.
steady-state value, see Fig. 3-1
steady-state value, see Fig. 3-1
steady-state value, see Fig. 3-1
at 24Vdc input and output 24V, 3.8A, see Fig. 3-3
see Fig. 3-2
0mF, 24V, resistive load 3.8A, see Fig. 3-2
3.8mF, 24V, resistive load 3.8A, see Fig. 3-2
see Fig. 3-1
external capacitors on the input voltage bus are allowed
without any limitations.
Fig. 3-1 Input voltage range
P_OUT
Rated input range
V_IN
Fig. 3-2 Turn-on behavior, definitions
Input
Voltage
Output
Voltage
- 5%
Start-up Rise
delay Time
Fig. 3-3 Input current vs. output load
Input Current, typ
6A
5
4
3
IInnppuutt::1284VVddcc
2
1
Output Current
0
0.5 1 1.5 2 2.5 3 3.5 4A
Mar. 2016 / Rev. 1.2 DS-CD5.241-L1-EN
All parameters are specified at 24V, 3.8A, 24Vdc input voltage, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
4/21