QS5.241 Datasheet, PDF (1/26 Pages) PULS GmbH – 24V, 5A, SINGLE PHASE INPUT

Q-Series
QS5.241, QS5.241-A1
24V, 5A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ Width only 40mm
ƒ Efficiency up to 92.7%
ƒ 150% (180W) Peak Load Capability
ƒ Easy Fuse Tripping due to High Overload Current
ƒ Active Power Factor Correction (PFC)
ƒ DC Input from 88 to 360Vdc
ƒ Negligible low Inrush Current Surge
ƒ Short-term Operation down to 60Vac and up to 300Vac
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Quick-connect Spring-clamp Terminals
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The most outstanding features of this Dimension Q-
Series DIN-rail power supply are the high efficiency and
the small size, which are achieved by a synchronous
rectification and further novel design details. The Q-
Series is part of the Dimension family, existing alongside
the lower featured C-Series.
With short-term peak power capability of 150% and
built-in large sized output capacitors, these features
help start motors, charge capacitors and absorb reverse
energy and often allow a unit of a lower wattage class
to be used.
High immunity to transients and power surges as well as
low electromagnetic emission makes usage in nearly
every environment possible.
The integrated output power manager, a wide range
input voltage design and virtually no input inrush
current make installation and usage simple. Diagnostics
are easy due to the dry DC-ok contact, a green DC-ok
LED and red overload LED.
Unique quick-connect spring-clamp terminals allow a
safe and fast installation and a large international
approval package for a variety of applications makes
this unit suitable for nearly every situation.
ORDER NUMBERS
Power Supply QS5.241
24-28V Standard unit
QS5.241-A1 ATEX approved unit
Accessory
ZM1.WALL
ZM12.SIDE
YR2.DIODE
UF20.241
Wall mount bracket
Side mount bracket
Redundancy module
Buffer unit
SHORT-FORM DATA
Output voltage
DC 24V
Adjustment range 24 - 28V
Output current
5 – 4.5A
continuous
7.5 – 6.7A
for typ. 4s
Output power
120W
continuous
180W
for typ. 4s
Output ripple
< 50mVpp
20Hz to 20MHz
Input voltage
AC 100-240V +10/-15%
Mains frequency 50-60Hz
±6%
AC Input current 1.10 / 0.62A
at 120 / 230Vac
Power factor
0.99 / 0.91
at 120 / 230Vac
AC Inrush current typ. 9 / 11A peak at 120 / 230Vac
Efficiency
91.6 / 92.7%
at 120 / 230Vac
Losses
11.0 / 9.4W
at 120 / 230Vac
Temperature range -25°C to +70°C operational
Derating
3W/°C
+60 to +70°C
Hold-up time
typ. 34 / 65ms at 120 / 230Vac
Dimensions
40x124x117mm WxHxD
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
Class I Div 2
ATEX
II 3G Ex nAC II T4 Marine
EMC, LVD
Mar. 2013 / Rev. 2.2 DS-QS5.241-EN
All parameters are specified at 24V, 5A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/26