QS20.244 Datasheet, PDF (1/25 Pages) PULS GmbH – 24V, 20A, SINGLE PHASE INPUT

Q-Series
QS20.244
24V, 20A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 200-240V Input
ƒ Width only 70mm
ƒ Efficiency up to 94.5%
ƒ Very Low No-load Losses
ƒ 150% (720W) Peak Load Capability
ƒ Safe Hiccup^PLUS Overload Mode
ƒ Easy Fuse Tripping due to High Overload Current
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Quick-connect Spring-clamp Terminals
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The most outstanding features of this Dimension Q-
Series DIN-rail power supply are the high efficiency and
the small size, which are achieved by a synchronous
rectification and further novel design details.
The QS20.244 is a device for 200-240V non-public mains
only. This supports regional applications and offers
additional cost and space savings. If a wide-range unit
with PFC is preferred, choose the QS20.241.
With short-term peak power capability of 150% and
built-in large sized output capacitors, these features
help start motors, charge capacitors and absorb reverse
energy and often allow a unit of a lower wattage class
to be used. Diagnostics are easy due to the dry DC-ok
contact, a green DC-ok LED and red overload LED.
High immunity to transients and power surges as well as
low electromagnetic emission makes usage in nearly
every environment possible.
Unique quick-connect spring-clamp terminals allow a
safe and fast installation and a large international
approval package for a variety of applications makes
this unit suitable for nearly every situation.
ORDER NUMBERS
Power Supply QS20.244
24-28V Standard unit
Accessory
ZM1.WALL
YR40.242
YR40.245
Wall mount bracket
Redundancy module
Redundancy module
SHORT-FORM DATA
Output voltage
DC 24V
Adjustment range 24 - 28V
Output current
20 – 17A
30 – 26A
Output power
480W
720W
Output ripple
< 100mVpp
Input voltage
AC 200-240V
Mains frequency 50-60Hz
AC Input current 4.45A
Power factor
0.5
AC Inrush current typ. 40A peak
Efficiency
94.5%
Losses
28.3W
Temperature range -25°C to +70°C
Derating
12W/°C
Hold-up time
typ. 46ms
Dimensions
70x124x127mm
continuous
for typ. 4s
continuous
for typ. 4s
20Hz to 20MHz
±15%
±6%
at 230Vac
at 230Vac
at 230Vac
at 230Vac
at 230Vac
operational
+60 to +70°C
at 230Vac
WxHxD
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
Marine
Class I Div 2
EMC, LVD, RoHS
Oct. 2013 / Rev. 2.2 DS-QS20.244-EN
All parameters are specified at 24V, 20A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/25