QS10.301 Datasheet, PDF (1/26 Pages) PULS GmbH – 30V, 8A, SINGLE PHASE INPUT

Q-Series
QS10.301
30V, 8A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ Width only 60mm
ƒ Efficiency up to 93.5%
ƒ 150% (360W) Peak Load Capability
ƒ Easy Fuse Tripping due to High Overload Current
ƒ Active Power Factor Correction (PFC)
ƒ Negligible low Inrush Current Surge
ƒ Short-term Operation down to 60Vac and up to 300Vac
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Quick-connect Spring-clamp Terminals
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The most outstanding features of this Dimension Q-
Series DIN-rail power supply are the high efficiency and
the small size, which are achieved by a synchronous
rectification and further novel design details. The Q-
Series is part of the Dimension family, existing alongside
the lower featured C-Series.
With short-term peak power capability of 150% and
built-in large sized output capacitors, these features
help start motors, charge capacitors and absorb reverse
energy and often allow a unit of a lower wattage class
to be used.
High immunity to transients and power surges as well as
low electromagnetic emission makes usage in nearly
every environment possible.
The integrated output power manager, a wide range
input voltage design and virtually no input inrush
current make installation and usage simple. Diagnostics
are easy due to the dry DC-ok contact, a green DC-ok
LED and red overload LED.
Unique quick-connect spring-clamp terminals allow a
safe and fast installation and a large international
approval package for a variety of applications makes
this unit suitable for nearly every situation.
ORDER NUMBERS
Power Supply QS10.301
28-32V Power supply
Accessory
ZM1.WALL
ZM13.SIDE
YR2.DIODE
Wall mount bracket
Side mount bracket
Redundancy module
SHORT-FORM DATA
Output voltage
DC 30V
Adjustment range 28 – 32V
Output current
8A
continuous at 30V
12A
for typ. 4s at 30V
Output power
240W
continuous
360W
for typ. 4s
Output ripple
< 50mVpp
20Hz to 20MHz
Input voltage
AC 100-240V ±15%
Mains frequency 50-60Hz
±6%
AC Input current 2.22 / 1.22A at 120 / 230Vac
Power factor
0.98 / 0.92
at 120 / 230Vac
AC Inrush current typ. 4 / 7A peak at 120 / 230Vac
Efficiency
92.6 / 93.5% at 120 / 230Vac
Losses
19.1 / 16.7W at 120 / 230Vac
Temperature range -25°C to +70°C operational
Derating
6W/°C
+60 to +70°C
Hold-up time
typ. 22 / 23ms at 120 / 230Vac
Dimensions
60x124x117mm WxHxD
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
Class I Div 2
EMC, LVD
Dec. 2014 / Rev. 2.2 DS-QS10.301-EN
All parameters are specified at 30V, 8A, 230Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/26