CP10.481 Datasheet, PDF (1/27 Pages) PULS GmbH – SINGLE PHASE INPUT

CP-Series
CP10.481
48V, 5.4A, SINGLE PHASE INPUT
POWER SUPPLY
ƒ AC 100-240V Wide-range Input
ƒ Width only 39mm
ƒ +10% (5.4A) continuous current up to +60°C
ƒ +20% (6A) continuous current up to +45°C
ƒ Efficiency up to 95.5%, Excellent Partial Load Efficiency
ƒ Safe Hiccup^PLUS Overload Mode
ƒ Active Power Factor Correction (PFC)
ƒ Minimal Inrush Current Surge
ƒ Full Power Between -25°C and +60°C
ƒ DC-OK Relay Contact
ƒ Meets ITE, ATEX, Class I Div2 and SEMI F47 Requirements
ƒ 3 Year Warranty
GENERAL DESCRIPTION
The DIMENSION CP-Series units are high-end power
supplies in a medium price range without compromising
quality, reliability and performance. The CP-Series is
part of the DIMENSION power supply family. The most
outstanding features of CP10.481 are the high
efficiency, advanced inrush current limitation, active PFC
and the wide operational temperature range.
The CP-Series includes all the essential basic functions.
The devices have a power reserve of 10% up to +60°C
and 20% up to +45°C included, which may even be used
continuously. Additionally, the CP10 can deliver three
times the nominal output current for at least 12ms
which helps to trip fuses on faulty output branches.
High immunity to transients and power surges as well as
low electromagnetic emission, a DC-OK relay contact
and a large international approval package for a variety
of applications makes this unit suitable for nearly every
situation.
ORDER NUMBERS
Power Supply CP10.481
48-56V Standard unit
Accessory
ZM12.SIDE
YR2.DIODE
YR40.482
Side mount bracket
Redundancy module
Redundancy module
SHORT-FORM DATA
Output voltage DC 48V
Adjustment range 48 – 56V
Output current 5.4A
at 48V, amb <60°C
6.0A
at 48V, amb <45°C
4.6A
at 56V, amb <60°C
5.15A
at 56V, amb <45°C
Output power
259W / 288W amb <60°C / <45°C
Output ripple
< 50mVpp
20Hz to 20MHz
AC Input voltage AC 100-240V ±10%
Mains frequency 50-60Hz
±6%
AC Input current 2.32 / 1.20A
at 120 / 230Vac
Power factor
0.99 / 0.98
at 120 / 230Vac
AC Inrush current 6 / 9A pk
at 40°C 120/230Vac
DC Input
DC 110-150V ±20%^*)
Efficiency
93.8 / 95.5%
at 120 / 230Vac
Losses
17.2 / 12.3W
at 120 / 230Vac
Temp. range
-25°C to +70°C operational
Derating
6.5W/°C
+60 to +70°C
Hold-up time
34 / 34ms
at 120 / 230Vac
Dimensions
39x124x117mm WxHxD
Weight
600g / 1.3lb
*) below 110Vdc (-15%) reduced output current
MARKINGS
IND. CONT. EQ.
UL 508
UL 60950-1
EMC, LVD, ATEX
Class I Div 2
IECEx
ATEX
II 3G Ex nA nC II T4 Gc ^{Marine, planned}
Feb. 2016 / Rev. 1.1 DS-CP10.481-EN
All parameters are specified at 48V, 5.4A, 230Vac, 50Hz, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.
www.pulspower.com Phone [phone] Germany
1/27